CYBEX Aton 2 Base
Base for Aton and Aton 2 Rear Facing Infant Car Seats
Fits both Aton and Aton 2:
ENGINEERED FOR SAFETY
Introducing the Aton Base 2 which is the first base to bring an European style adjustable Load Leg to the United States market.
ADJUSTABLE LOAD LEG
The Load Leg, a virtual standard in Europe, is now available on the Base 2. The Load Leg provides additional support between the child restraint and the vehicle, allowing the Base 2 to more effectively absorb and distribute crash energy.
The Leg dramatically reduces forward pitching of the seat, keeping the child in the prescribed position during the entire crash event. This reduces the risk of spinal cord injury due to stretching, which can be caused if the infant seat pitches too far forward.
* Note: If the load leg cannot be deployed it can be folded under the base and the base used without it provided a secure installation can be achieved.
A solid steel spine running through the Aton Base 2 (shown in blue) creates metal to metal contact through the Load Leg, infant carrier, and the vehicle for added strength and properly managed crash forces. No other base features this type of steel structure. Steel Chassis
DUAL WEIGHT RANGES
Dual Weight Ranges The dual weight ranges of the Base help to make sure your seat is reclined at the proper angle according to the weight of your child. One range accommodates children from 4–22 pounds and the other, 22–35 pounds.
DUAL ACTION RELEASE / Dual Action Release Safety
A green safety button indicates a secure connection has been made between the infant carrier and the Base. This button is part of a two-step process needed to remove the Aton Infant Carrier from the Base 2, preventing an accidental release.
Whether you use LATCH or vehicle belts, the Aton 2 Base is truly easy to install in your vehicle.
INNOVATIVE BELT TENSIONER
The Base 2 uses a unique Belt Tensioning Plate for a quick, simple and secure installation when using either LATCH or vehicle belts. Simply remove the slack from the belts and close the plate for a super easy and tight install.
ADJUSTABLE LOAD LEG FOOT
Simply squeeze the release handle on the Load Leg to lower the foot to the vehicle floor. The leg adjusts from 10¾ to 18¾ inches to allow firm contact between the foot and the vehicle floor.
A four-position, spring activated leveling foot makes reclining the Base 2 easy. The dual range level indicator makes sure your child is reclined at the proper angle according to his weight.
PREMIUM LATCH CONNECTORS
We use only premium LATCH Connectors on our Base 2, making for a quick and easy installation. LATCH Connectors can be stored inside the Base 2 when not in use.
FREE LATCH GUIDES
LATCH Guides easily hook onto your vehicle's lower LATCH anchors to help make car seat installation easier while protecting your vehicle seats. Keep a pair in each car for easy transfer of car seats between vehicles.
**Not compatible with hook-type Lower LATCH Connectors.
Max Width 15"
Height Min: 5½" / Max: 8"
Load Leg Length Min: 10.75" / Max: 18.75"
Weight 12.2 lbs
CYBEX Aton 2 Base
Features: Level Indicator For Proper Installation, LATCH Compatiblity, Adjustable Height, Quick Release
Includes: Car Seat Base, latch guides, belt tensioning plate
Compatible With: Cybex car seats
Safety and Security Features: Rear Facing Only, Car Seat Anchors, LATCH Equipped Car Seat, Compatible with Lap Seat Belt, load leg
Car Seat Safety Stage: Stage 1
Care and Cleaning: Wipe Clean with a Damp Cloth, Wipe Clean With Soap and Water, Clean with Water and Mild Detergent
Material: Plastic, Steel
Dimensions: 26.5 " H x 15.0 M W x 21.5 " D
Weight: 12.2 Lb.
Battery no battery used
Assembly Details: adult assembly required
Certifications: Meets Federal Motor Vehicle Safety Standards, Meets FMVSS 213
- Online Item #: 15205205
- Store Item Number (DPCI): 030-09-2693
- Item can be gift wrapped.