Travel Smart by Conair Digital Luggage Scale

A: I did this too. That 50.0 is just a sticker! If you remove it the correct screen is displaying underneath!

A: When the power button is pressed, 88.8 should appear and after a few seconds, "0.0" should appear. When the padlock icon is on it is in locked mode which means the weight will lock in and stay on the screen when you release the item you are weighing. If you do not want to use in the lock mode, you can press the kg/lb button repeatedly, you will see the image on the right side of the screen go from locked, to unlock, then to peak mode. Each mode use is described in the instruction manual. Travel Smart

A: You will need a head screwdriver to open the battery compartment on the Travel Smart by Conair Digital Luggage Scale.

A: Hi! Yes you can use this scale to weigh other items, all though the primary use is for luggage. The scale displays in either Pounds or Kilograms, and the max weigh is 80lbs or 36kgs.

A: This luggage scale has a limited one year warranty in the US and Canada only

A: Smallest weight is 3 lbs ACCURACY: +/- (1% + 0.1kg/0.1lb) (for lock and unlock mode), +10/-0% (for peak mode) Thank you for choosing Travel Smart

A: Hi Linda the scale should read 00 when you turn it on, not 88.8. once you weigh your suitcase, the weight will show on the digital screen. Travel Smart

A: Hope this helps . . . INSTRUCTIONS BASIC FUNCTIONS The power button is used to turn unit on/off and reset it. The kg/lb button is used to change weight unit and to select the weighing mode. In all modes, the most accurate reading is achieved by lifting your luggage slowly and steadily and holding your luggage still. In case the luggage moves, the scale takes multiple readings and compares those before displaying stabilized weight reading. Three weighing modes are available: • Lock mode (locked padlock icon) – Most accurate mode. Scale locks in on weight after several seconds. • Unlock mode (open padlock icon) – Scale is continuously weighing luggage. Please note the display does not lock in on one weight reading. This mode should be used for adding or removing weight. • Peak mode (graph icon) – Most convenient mode. Scale locks in weight within less than half a second. Please note: Travel Smart® Luggage Scale weight may vary slightly from air port scales. Weight unit selection To change the weight unit from pounds to kilograms or vice versa, press the power button to turn it on and hold the kg/lb button for 2 seconds, until the former unit (kg or lb) starts to blink, then press the kg/lb button again to change unit measurement. Selected unit will blink for 3 seconds to register selection. IMPORTANT: Hold scale upright by the handle during weighing. LOCK MODE 1. Press the power button once to turn unit on or reset it. Display will read “88.8.” 2. After a few seconds, “0.0” and the icon corresponding to the last weighing mode used will appear on the display. The scale is then ready to be used. 3. Press the kg/lb button repeatedly until the locked padlock appears on the display to activate the lock mode. 4. Attach luggage to hook and lift steadily. “000” will flash until luggage weight is stabilized (hold luggage as still as possible). Display will then read stabilized weight. 5. The scale will emit two short beeps if weight is under 50 pounds, or a long beep if weight is between 50.2 and 80 pounds. 6. To weigh more pieces of luggage, press the power button once to reset the scale and repeat weighing process. 7. The scale will shut off automatically 60 seconds after displaying the last weight, giving you time to set down your luggage and check the weight. To turn the scale off manually, press and hold the power button for 2 seconds. UNLOCK MODE 1. Press the power button once to turn unit on or reset it. Display will read “88.8.” After a few seconds, “0.0” and the icon corresponding to the last weighing mode used will appear on the display. The scale is then ready to be used. 2. Press the kg/lb repeatedly until the open padlock appears on the display to activate the unlock mode. 3. Attach luggage to hook and lift steadily. “000” will fl ash. The display reading will automatically update as weight is added/removed from luggage. 4. The scale will emit continuous short beeps if weight is under 50 pounds or a long constant beep if weight is between 50.2 and 80 pounds. 5. To weigh more pieces of luggage, press the power button once to reset the scale and repeat weighing process. 6. The scale will shut off automatically 60 seconds after displaying the last weight. To turn the scale off manually, press and hold the power button for 2 seconds. PEAK MODE 1. Press the power button once to turn unit on or reset it. Display will read “88.8.” After a few seconds, “0.0” and the icon corresponding to the last weighing mode used will appear on the display. The scale is then ready to be used. 2. Press the kg/lb button repeatedly until the graph appears on the display to activate the peak mode. 3. Attach luggage to hook and lift steadily. 4. Highest weight reading will display after a few seconds. 5. The scale will emit two short beeps if weight is under 50 pounds or a long beep if weight is between 50.2 and 80 pounds. 6. To weigh more pieces of luggage, press the power button once to reset the scale and repeat weighing process. 7. The scale will shut off automatically 60 seconds after displaying the last weight, giving you time to set down your luggage and check the weight on the display. To turn the scale off manually, press and hold the power button for 2 seconds.

A: 80 lbs

A: It uses the flat, round, nickel-sized batteries (not AA or AAA). It comes with the batteries included, but you need to use a small Phillips screwdriver to open the battery compartment And take out the plastic strip (battery-saver) before the scale will turn on.