all-brands
all-sizes| Mattress Type | Height | Twin | Twin XL | Full | Queen | King |
|---|---|---|---|---|---|---|
| Low Profile | approx. 4-9" | 38" W x 74.5" L | 38" W x 79.5" L | 53" W x 74.5" L | 60" W x 79.5" L | 76" W x 79.5" L |
| Raised | approx. 15-24" | 38" W x 74.5" L | 38" W x 79.5" L | 53" W x 74.5" L | 60" W x 79.5" L | 76" W x 79.5" L |
All Sizes in Inches Unless Otherwise Stated
A: Approximate inflation time is 2 1⁄4 minutes
A: Hi Rob! Inflation and deflation typically take about 2–3 minutes each with the built-in electric pump.
A: Hi Carter, yes, the Intex Mid Rise Hexbeam air mattress pump can be plugged into a regular 120V household wall socket.
A: Yes
A: No need to charge the charger, but it will need an outlet to plug it in to inflate the air mattress
A: The Intex Mid Rise Hexbeam 14" Electric Pump Twin Air Mattress does not require charging before first use. It features a built-in electric pump that plugs directly into a standard 110–120V wall outlet for inflation. If you're camping without access to electricity, you can use a manual pump through the mattress's manual inflation port. Simply ensure the control dial is in the "Off" position before connecting the manual pump. For more information or assistance, please contact Intex customer support at intexcorp.com or call 310-549-8235.
A: Yes
A: Yes, the Intex Mid Rise Hexbeam 14" Electric Pump Twin Air Mattress includes a storage bag for your convenience.
A: Yes. You can always use a hand pump or consider getting a pump with a plug into 12V DC automobile cigarette lighter
A: Yes, if electrical power is not available, you can use a conventional foot pump, hand pump, or battery-operated air pump. Simply connect it to the manual inflation port, ensuring the control dial is in the closed (pump off) position. Remove the cap from the manual port, insert the pump nozzle, and inflate the mattress to your desired firmness.
A: Hey Brooks! Here's a simple breakdown of how to inflate and deflate the Intex Mid Rise Hexbeam 14" Electric Pump Twin Air Mattress To Inflate: 1. Plug in the power cord to an AC outlet. 2. Turn the control dial fully clockwise until it stops. The mattress will start inflating. 3. Once it's fully inflated to your liking, turn the control dial to the center position to shut off the pump and seal the valve. 4. If it feels too firm, turn the dial slightly counterclockwise until some air escapes. When you reach the desired firmness, return the dial to the center. Don’t unplug the pump while it’s running! Always turn the dial to the off/center position before unplugging. To Deflate: 1. Plug the power cord back into the outlet. 2. Turn the control dial fully counterclockwise to begin deflation. 3. When the air is completely out, turn the dial back to the center position to stop the pump. 4. Unplug and store the power cord neatly in the compartment. 5. Roll up the mattress starting from the end opposite the pump for compact storage.
A: Just plug in the airbed to inflate!
