About this item
- Built to withstand sun, snow, and strong winds
- Genuine POLYWOOD lumber won't fade, splinter, or rot
- 20-year limited residential warranty; 3-year limited commercial warranty
- Clean with soap, water, and a soft-bristle brush
- Made in the USA
Q: are the pieces pre-drilled?
A: Hello, These will come with pieces ready to assemble, with any full holes, or pilot holes as necessary. There will be step by step instructions as well as hardware included. The only tool that is not included is a 7/16" wrench. Thanks for asking, Mindysubmitted byPOLYWOOD Brand Expert - 6 months agoBrand expert
A: Hello - We're glad you asked! Each piece of this timeless Adirondack chair is pre-drilled and comes with instructions and the tools you'll need to put it together. Thanks for stopping by! - Jodisubmitted byJodi - 6 months agoTarget staff support
Q: I am assembling my first of two adirondack chairs and the brace does not fit in the pockets on either side - too large. Advice? Thanks
A: Hello - We apologize that you are having issues assembling this item. Please give us a call at 800-440-0680 and we'd be happy to assist you. - Lenayasubmitted byLenaya - 6 months agoTarget staff support
A: Good afternoon! We sincerely apologize for the inconvenience caused. Kindly get in touch with Target, and they will assist you with resolving the matter. Thanks! Oliviasubmitted byPOLYWOOD Brand Expert - 6 months agoBrand expert
Q: are these too low for the elderly?
A: Hi lsugolfmom - Great question! This beautiful chair overall dimensions is 32.25 Inches (H) x 30.25 Inches (W) x 32.25 Inches (D) with seat dimensions 20.5 Inches [W], 17.63 Inches [D], & 32.25 Inches [floor to seat top]. I hope this information helps! - Cedriasubmitted byCedria - 7 months agoTarget staff support
A: Product states the seat is 13.5" high which would be too low for many elderly. For reference, an ADA toilet seat height has to be between 17-19" high. So these are very low.submitted byAndrea1213 - 6 months ago
Q: where are these chairs made?
A: Hello, We are proudly made in the USA. We have two manufacturing facilities, Syracuse Indiana and Roxboro North Carolina. Thanks, Heathersubmitted byPOLYWOOD Brand Expert - 2 years agoBrand expert
A: HI - Great question, theses chairs was made in the USA. Happy shopping!submitted byTazia - 2 years agoTarget staff support
Q: what size box to they arrive in?
A: Hello Kristen, The box for the Moore POLYWOOD Adirondack Chair - Project 62™ is 31"L X 23"WX 13"H and weighs 44lb. Thanks for the great question, Heathersubmitted byPOLYWOOD Brand Expert - 2 years agoBrand expert
A: Hello – The shipping box is 31 inches length x 28 inches width x 10 inches height and weighs 40 pounds. - Simonnesubmitted bySimonne - 2 years agoTarget staff support
Q: Is assembly required?
A: Hi rrd - We're glad you asked! This timeless Adirondack chair requires assembly and will come with the tools you'll need to put it together. Thanks for stopping by! - Allisubmitted byAlli - 4 years agoTarget staff support
A: It was not hard to put together, but the illustration was not clear on how the arms were placed. We got it correct, but had to figure it out. Most of the tools are included, but you will need to have a 7/16 wrench.submitted byspyglassweb - 4 years ago
Q: are these heavy enough to withstand strong winds without blowing away?
A: Hi Molly - Give your outdoor area a unique look with this adirondack chair. It weighs about 36 lbs just to give you an idea. Thanks for stopping by! - Terrasubmitted byTerra - 4 years agoTarget staff support
A: The chairs are very heavy. They will not blow awaysubmitted byspyglassweb - 4 years ago
Q: Is there any wood in this product or is it all recycled plastic?
A: The expanded details state, Material: High-Density Polyethylene, Plastic (Frame).submitted byJenn - 5 years ago
A: Hi Sconnie – Great question. We did confirm that this chair is all plastic. Thanks for stopping by! - Phonsavanhsubmitted byPhonsavanh - 4 years agoTarget staff support
Q: Is the slate gray color the same as the gray color of the Moore Polywood bench? The slate gray looks darker, so I wanted to confirm. I'd love the chairs and bench to match.
A: Hello Jenny, Thank you for reaching out. All of POLYWOOD's furniture is made with the same shade of lumber as we do only have one Slate Grey option. The color may be a little different if made from different batches of lumber but the difference would not be very noticeable. Thanks -Jasonsubmitted byPOLYWOOD Brand Expert - 5 months agoBrand expert
Q: Do the dark colors get hot in the direct sun? As in too hot to sit in comfortably?
A: Hi Ali, Thank you for reaching out with your question! Our products are designed to disperse heat throughout the lumber, even if set out in direct sunlight. It may still be warm to the touch but should be comfortable enough to still use in the heat of day. -Thanks for asking, Michellesubmitted byPOLYWOOD Brand Expert - 6 months agoBrand expert