Target
TV STandsTV Screen Size | Suggested TV Stand Width |
---|---|
up to 40" | up to 40" long |
40" - 50" | up to 40" - 50" long |
50" - 60" | up to 50" - 60" long |
60" - 70" | up to 60" - 70" long |
All Sizes in Inches Unless Otherwise Stated
Target
TV STandsTV Screen Size | Suggested TV Stand Width |
---|---|
up to 40" | up to 40" long |
40" - 50" | up to 40" - 50" long |
50" - 60" | up to 50" - 60" long |
60" - 70" | up to 60" - 70" long |
All Sizes in Inches Unless Otherwise Stated
A: The Solar TV Stand is intended for 70" TVs. There would not be enough room above the top shelf to accommodate a larger TV.
A: The Solar TV stand is intended for televisions up to 70"; there would not be enough space above the top shelf to accommodate a 75" TV.
A: The dimensions of the Solar TV Stand are 42"W x 23.5"D x 50.2"H to the upper bar of the TV mount. It would be taller with a TV attached. The stand weighs 80.3 pounds; i t is not recommended that this be placed on top of a dresser.
A: The dimensions of the Solar TV Stand are 42"W x 23.5"D x 50.2"H to the upper bar of the TV mount. It would be taller with a TV attached. The stand weighs 80.3 pounds; i t is not recommended that this be placed on top of a dresser.
A: Yes, this mount works with Common VESA: 200 x 200, 400 x 400 and 600 x 400.
A: Hello, this TV Stand's mount does work with common VESA: 200 x 200, 400 x 400 and 600 x 400.
A: Each TV has a specified VESA pattern, a set of four holes in the back of the TV into which bolts can be secured for mounting. The pattern itself can vary, but so can the location of the pattern, if that makes sense. So, if this rectangular pattern of bolts is located near the top of the TV on one brand, and near the bottom on another, even if the TVs themselves are identical sizes, the one with the higher bolt placement would be less likely to fit because the TV would hang lower on the bracket. Since this product first launched, there has only been one incident where a customer reported that their television, which was a Phillips 65" TV model 65PFL5504/F7, did not fit. This item will work with most TVs up to 70", and an assortment of hardware is included for this purpose.
A: The shelves are not adjustable. The base of the cabinet is layered, with shelves separated by built in supports. Thank you for your question!
A: The Solar TV Stand ships in a box that measures 47.6"L x 24.2"W x 7.7"H and weighing about 90 pounds. Thank you for your question and enjoy your day!
A: This would depend on your television's VESA pattern, and where it hangs on the TV mount. From the floor to the top shelf measures about 24 inches, so a reasonable estimate might be around 30 inches. Thank you for your question.
A: The width at the base of the Solar TV Stand measures 42". Thank you for your question!
A: Not really, though smaller TVs could potentially have an upper or lower height to choose from. There are two hook heights on the mount's vertical bar. It would depend on the size of your TV, as well as its VESA pattern; larger TVs are also limited by the distance between the top shelf and the mount. You can view the specifics of the mount in the assembly instructions listed on the Ameriwood Home website. At the bottom of the home page, click on Assembly Manual Search and enter 1762096PCOM.
A: Hello, all mounting hardware will come with the TV Stand. There are several options to fit the TV and stand correctly. Thank you.