Dynaudio Emit 30 Floorstanding Loudspeakers - Pair (Black Satin)

Hi-fi starts with Emit.Compact floorstanders for stereo and surroundEmit 30 is perfect for larger stereo systems or compact multi-channel home cinema set-ups in medium to large rooms.If youre looking for a little more power from your system, youve found it. Emit 30 is a compact two-and-a-half-way speaker designed to impress whether its used as a stand-alone stereo pair or as part of a 5.1-channel (or more) home cinema.Like its little brother, Emit 10, it uses 14cm MSP woofers similar to those used in the Evoke series this time doubled-up in each speaker for more low-frequency muscle, plus midrange clarity and punch. MSP stands for Magnesium Silicate Polymer. Its a material developed in-house for woofer cones and has been used for decades including on the most-lauded high-end models. MSP provides precisely the right combination of lightness, stiffness, and damping to deliver control and outright power exactly where its needed.Premium woofer technologyThe cones are molded in one piece; a separate glued dust cap is not used. The little balance ribs around the edge of the center are bonded directly to the voice-coil behind it, making the whole motor assembly one solid piece. Using fewer moving parts gives the engineers fine control over how the speaker moves which, in turn, means fine control over how it performs. Youll hear it as strong, tight bass and startlingly clear vocals, guitars, and more. Even at eyebrow-raising volume.Each woofer is powered by a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. Using two magnets means more effectively directing where the magnetic energy goes its a lesson learned when developing the award-winning Special Forty anniversary series.The target for all that flux is the voice-coil. Aluminum windings are used in the Emit 30. Aluminum is light (which minimizes inertia on the cones back-and-forth movement), and because its lighter than copper wire, it means more windings can be packed onto the two-layer glass fiber former. More windings equal more power and greater control over fine movement. Theres a twist, though (please pardon the pun): the aluminum wire has been coated in a very thin copper coating to further increase the control the amplifier has on the voice coil. More force with only a fractional weight gain: win-win.High-performance Cerotar tweeterWhile the twin 14cm mid/bass units deal with the...well, midrange and bass...the upper frequencies are handled by the tweeter. Emit might be an entry-level speaker, but certainly not any old unit off the shelf; witness the incredible Cerotar tweeter (the same used in the Evoke). Its based on the Esotar Forty anniversary tweeter and the Esotar Profound in the Core studio reference speakers and must be heard to be believed.The 28mm coated soft-dome diaphragm is backed up by the clever Hexis inner dome. The playing surface has been specifically engineered to produce ultra-clear, ultra-detailed high-frequencies without breakup (even at high volumes), while the Hexis smooths the airflow behind it to reduces unwanted resonances. An aluminum voice-coil and airflow magnet system provide the power. Cerotar is designed for high performance without listener fatigue perfect if youre given to long listening sessions (and youre music lovers, so we bet you are).The bass-port on the back panel has dual flares (one inside; one outside), and has been tuned to minimize unwanted chuffing. Its supplied with foam inserts that can be used to optimize performance for the speakers position relative to the wall.Danish-designed cabinetryEmit 30s cabinets are made from 18mm MDF to provide a solid, stable platform for the drivers to do their work. Theyre internally damped with polyester fiber, measured down to the gram for exactly the right amount of resonance suppression.On the outside, you can choose from three custom laminate finishes: Black, White, or Walnut. Theyve been chosen to com