Driver Recovery Winch Accessory Set with 10-Ton Snatch Block, 10 Foot Tree Strap and Quick Connector Kit

The combo package from Driver Recovery Products contains several popular, useful winch accessories: a premium snatch block (10-ton), 10' tree protector strap, and quick connector set. The snatch block can be used to increase the pulling power of the winch using a double-line pull technique, or for indirect pulls by using the snatch block as the anchor point. It is made of 1/4" thick high tensile strength steel and is coated with an epoxy grade finish that guards against chipping and rust better than powder-coat finishes. The heavy-duty bowel bearing and integrated grease fitting provides a smooth operation. It can swivel open to accept line without disassembly. The block measures 9-3/4" x 4-5/8" and has a capacity of 20,000 pounds. The tree protector strap measures 3" wide and 10' long with a pulling strength up to 24,000 pounds. It is designed to provide a secure anchor point without cutting into or damaging trees like chain or wire rope. The quick connector set is a very simple method for disconnecting power to a winch, or other devices. The connectors are constructed of tough polycarbonate with a fitted rubber boot guarding from dust, moisture, corrosion, and the elements. The ends are identical so that either end may be used on the power or load side, but they are mated so they connect in only one polarity. The connectors are designed for low-voltage use (12-36 volts DC), and can be used with any winch although the ends may not exactly match connects on other brands. Connectors are quick and easy to use. The components are suitable with high-current use like for winches that are rated 8,000 pounds or more. The true rated capacity is 350 amps. Terminal pins are 0.35" in diameter and take 0-4 gauge wire. When connected the attached set measures 5-1/4" x 2-1/8" x 1". Included is one pair of connectors, 2 connector ends, 4 terminal pins, and 2 rubber boots.