A:Â sporting goods/HIPA.
A:Â I ordered mine online for store pickup and they pulled it for me and had it at the customer service counter when I went to get it. Saved me from having to find it myself.
A:Â Shoe Goo is a great choice for adhering the soles onto shoes or boots. For best results, treat the product as a contact adhesive, by applying the product to both surfaces and allow 2-3 minutes for the product to get tacky before mating the two together and clamping/securing with weight for 24 hours. Be sure to clean the surfaces with alcohol or acetone prior to applying. Thank you for your support of Eclectic Products and Target!
A:Â Shoe Goo is a great adhesive for adhering two leather straps back together, while remaining flexible. There are often two sides of leather--the treated (smooth) side and the untreated (rough) side. The untreated sides will bond much stronger than the treated leather side. Shoe Goo will also bond leather and rubber shoes. Treat the product as a contact adhesive, meaning apply the product to both surfaces and allow 2-3 minutes for the product to get tacky before mating the two together and clamping/securing with weight for 24 hours. Be sure to clean the surfaces with alcohol or acetone prior to applying. Thank you for your support of Eclectic Products & Target!
A:Â Hi Erick! Shoe Goo is a great adhesive for repairing many different shoes and works very well on rubber (although some very glossy and smooth plastics (polystyrene, polyethylene, polypropylene) may have adhesion issues). The Gucci Slides appear to be very shiny and smooth material so it may be best to try a small area to ensure quality adhesion before employing on the entire project. Be sure to first wipe the surface clean with alcohol, prior to applying, to remove any oils or adhesion barriers. Thank you for your support of Eclectic Products & Target!
A:Â Hi Larry! Shoe Goo would be great for this! We suggest you clean the area of all debris, dirt, and dust and then wipe it down with some alcohol. Apply Shoe GOO directly to each surface to be bonded or repaired. Allow the adhesive to partially cure, approximately 2 minutes before mating surfaces. We advise to lightly clamp, tape, or add weight to hold the two parts together until fully cured. Thank you for your support of Eclectic Products & Target!
A:Â HI Mike - Shoe Goo has a shelf life of 2 years UNOPENED. Once opened, the shelf life will be dependent on how well you store the product. Ideal temperature for storage is 50 to 80 degrees fahrenheit. It is crucial to clean any adhesive from the threads, then restore the cap snuggly to avoid any air flow that will cause the solvent to evaporate , allowing the glue to dry out. Thank you for your support of Eclectic Products & Target!
A:Â Hi KS! Shoe GOO contains a resin system designed for stronger abrasion resistance and better adhesion to flexible materials (like shoes!). It is water resistant immediately upon application and is the most versatile and effective adhesive available! Thank you for your support of Eclectic Products & Target!
A:Â It would depend on what you are trying to accomplish. Shoe GOO is formulated to repair, seal, and stick to a wide variety of materials. It can be used to rebuild worn out soles, coat & protect to avoid premature wear, and reinforce weak or worn areas of your shoe.