ARROW FASTENER 16 Ga. Finish Stapler 1 pk

Would not work right out of the box. Made sure pressure was in 60-100 psi range. The staples flop back and forth in the slot so the spring end does not seem to be connected as there is no pressure on the staples. Totally useless as staples will not feed. i see the spring in there but seems small diameter and not connected at both ends. Seems to be well built but is useless as is. Thank you for sending me the replacement stapler but this one too fires but no staples come out. The staples again you could hear fell back and forth in the slot so i filled the slot full; no effect. Never got one staple out of 2 diff. guns.

I have purchased two pneumatic staplers. While they both fire when connected to air supply, neither fired the staples. I made sure to have the correct staples and tried two different sizes to no avail. Very disapointing!!

[This review was collected as part of a promotion.] On line review code1117. Arrow electric stapler gun. Works great!

I Bought 2 in December and they didn't last 4 months. Both are broken and can't do anything with them.

After limited use, stapler won’t feed. Found firing pin broken.

[This review was collected as part of a promotion.] In March 2026 I purchased this pneumatic staple gun because I had a lot of insulation (knocked down during a recent roofing project) to stabilize. I like the ease of use of the product and the ability to charge it up electrically. I am a little disappointed that it seems a bit underpowered (I can't figure out how to drive the staples as far into the soft pine studs as I need it to go in order to hold my twine well.)

[This review was collected as part of a promotion.] exactly what i was looking for..easy to use..love it..wish i had gotten it sooner code 1117

Used once and then tried to use again a few months later and the spring broke, useless now

[This review was collected as part of a promotion.] this is an amazing product, work every time it is needed.

bought first one to insulate a garage used 1/4 staples after about one box of staples the spring that keeps the staple refill latch shut broke out. rapped tape around and continued until staple plunger jammed up. Took it apart and plunger shaft was broken. Foolishly bought another gun and about same number of staples later that plunger broke also.. No parts available??????

[This review was collected as part of a promotion.] I am a contractor that uses this stapler for many different applications. My latest project was covering speaker fabric on a custom built entertainment center. Online review code 1117

Stopped working halfway through a medium size upholstery project. Cleared a staple jam but firing piston was stuck. Freed it but it no longer it no longer shot staples. I'll see if Arrow honors its warranty.....

[This review was collected as part of a promotion.] Bought this for my wife , she loves it. Free storage caddy offer 1117

We own an electric and a manual stapler but this one works on multiple layers of Marine Vinyl for boat seats. Extremely happy with it and totally recommend it for all of your projects. We used Stainless Steel Staples.

[This review was collected as part of a promotion.] This PT50 pneumatic stapler was a great tool for my first foray into reupholstering a chair. There’s definitely a user learning curve for device mastery, but once you’ve got it, you can move right along! Love the ease in refilling the staples too.

[This review was collected as part of a promotion.] Great pneumatic tool to have as a dyi. Strait forward design and compact with power

[This review was collected as part of a promotion.] This pneumatic T50 stapler works much better than it's electric version. The electric version would not seat 3/8" staples in plywood. This one had no problem. I gave it a 4 star rating because I drove less than 100 staples, not enough to know how it will hold up driving more. Oil is not required making this easy to operate. Ready to use out of box after loading from bottom.

[This review was collected as part of a promotion.] We put insulation and paneling in garage and this made the job so much quicker!

The job was for some general repairs around my shop. Then I also used it for hanging decorations and background setup cause my wife does photography.

Bought the staple gun so that I could rebuild the bunks on my boat trailer. I had several other staplers that wouldn’t push T50s into treated lumber. I didn’t want to use thinner staples so I bought this gun. Love it! Worked like a champ! Drove half inch staples through Marine carpet into treated lumber at 70 psi. Could probably have driven them as hard with less than 70 psi. No misfires. Shot over 150 staples I cant attest to its quality a.k.a. how long it will last because I’ve only used it once, but it seems well built. I’m impressed it doesn’t require oil so we’ll see. Price was fabulous. Super good value. highly recommended!