pop filter shock mount

A typical kit includes an articulated arm made from 200 mm and 150 mm hexagonal aluminum bars, two elastic suspension rings, a central elbow with a universal thread for stand attachment, and a 5" diameter double-face pop filter.

These mounts are described as compatible with most microphone sizes and types, and are suitable for microphones up to 2" in diameter.

The pop filter is 5" in diameter and features a double-face, dual-membrane design with replaceable membranes.

The microphone is secured by weaving it through the parallel rubber bands of each elastic ring (two bands at a time). The central articulated support can be fixed along the hex bar to balance and stabilize the mic.

The shock mount isolates the microphone from the stand using elastic suspension and a mechanical support, which reduces transmitted handling and floor rumble — descriptions note this approach can lower undesirable vibrations by about 15 dB.

The system uses two hex bars with articulated connectors so the pop filter can be positioned "up and over" the microphone. The assembly adjusts and locks firmly for vertical, inverted, and varied distance/clearance configurations.

They address plosive (hard consonant) impacts and breath pops, reduce vibrational thuds and handling/floor rumble, and help prevent plosives from overloading the signal or stressing the mic capsule.