surge protector tower

Most tower surge protectors are rated for a 15-amp maximum and standard household voltages. Example ratings shown include 15 A with wattage representations such as 1,800 W or 1,875 W (often shown as 15A/1800W or 15A/1875W).

USB outputs vary by model. Listings include shared multi‑amp USB banks (e.g., ports that share a 6 A total), USB‑C PD ports rated at about 20 W, USB‑A ports rated around 2.4 A each, and combined USB power totals such as 4.8 A/24 W shared across ports.

Common controls and indicators include on/off master switches or per‑layer switches to control groups of outlets, LEDs that confirm protection status, and reset/off switches with integrated circuit breakers to trip and protect against overloads. These features help manage power use and provide visible protection status.

Joule ratings vary by model; examples shown include 1,800 J, 1,200 J, 1,140 J, 1,080 J, and 1,050 J.

Typical cord lengths listed include about 6 ft, 6.5 ft, 8 ft, and 10 ft. One listing shows a 96‑ft length (likely an outlier). Plug styles commonly mentioned are ultra‑thin/flat plugs and right‑angle (NEMA) plugs for fitting close to walls.

Common space‑saving features include vertical tower designs, widely spaced outlets to avoid blocking adjacent plugs, flat or right‑angle plugs to sit close to walls, built‑in shelves on some wall‑mountable units, and retractable or longer extension cords on certain models.

Listings mention fire‑resistant ABS+PC housings, pure‑copper extension cords, braided or fabric‑braided cords on some models, reinforced junctions, and anti‑slip bases or rubber feet to enhance stability and safety.

Advertised capacity varies by model. Some units focus on around 6 outlets, while tower designs advertise higher counts such as 16‑in‑1, 18‑in‑1, or 20‑in‑1 configurations depending on the mix of AC outlets and USB ports.