Brixwell Adjustable Flat Leaf Guide Hardware Brass Construction, 4" Overall Height, white Finish

The Brixwell Adjustable Guide Hinge is a flat leaf door hinge designed for use in door systems that require controlled alignment and guided movement. This hinge is commonly installed as part of a multi-hinge door setup, where most doors use two guide hinges along with one set hinge. For larger doors, three guide hinges and one set hinge may be used to maintain proper door balance and movement. This hinge is manufactured from brass and features a white finish that matches traditional and modern door hardware. The flat leaf design allows it to sit flush against the door and frame, supporting stable mounting and consistent alignment. The adjustable construction helps guide the door during opening and closing, reducing uneven movement caused by worn or misaligned hinges. The overall height of the hinge measures 4", with a leaf width of 1-13/16". Precise hole center spacing supports accurate installation. The left side includes an inner hole center distance of 3-1/8" and an outer hole center distance of 2-57/64". The right side features an inner hole center distance of 2-3/4" and an outer hole center distance of 1-37/64". The knuckle thickness measures 3/32", allowing proper hinge rotation while maintaining clearance between door and frame. This adjustable guide hinge is used on residential and commercial doors where guided motion is required, such as entry doors, interior doors, and replacement door hardware applications.