Panamax MR5100 Line Conditioner

Panamaxs MR Family of products offers several layers of surge protection. Panamaxs patented Automatic Voltage Monitoring (AVM) technology continuously monitors the incoming power. In case of an undervoltage or brownout (too little electricity) or an overvoltage (too much electricity) a flashing red lightning bolt will be displayed and power to the equipment is automatically turned off. When voltage returns to a safe level power to the equipment is automatically reconnected.

The other layer of surge protection Panamax offers is their exclusive Protect or Disconnect technology. This ultra fast protection circuitry completely protects your equipment from surges such as lightning. When overwhelmed with extreme catastrophic events Panamax permanently disconnects AC power to equipment. All Panamax products offer this core protection technology.

Protecting a complete system may sometimes require that signal wires coming out of the wall be protected as well. Panamax has you covered there too. Universal ultra low-loss coaxial protection (as well as LAN/Ethernet) protection prevents signal lines from carrying damaging surges while maintaining full high-definition and high-speed Internet signals to your equipment for your connected life.



Panamax MR5100 Line Conditioner Features:
•11 Protected Filtered Power Outlets
•Exclusive Automatic Voltage Monitoring (AVM)
•Protect Or Disconnect Technology
•Power Sequencing (1 Always On Bank 1 Switched Bank 1 Delayed High Current Bank)
•USB Charging (0.5v/5v)
•Linear Level 4 Filtration (3 Total Isolated Banks) With Dedicated High Current Outlet Bank (4 Outlets)
•Antenna Cable Or Satellite LAN And Telco Signal Protection
•10 ft. Power Cable With Straight Plug
•Rack Mounting Kit Included

Panamax MR5100 Line Conditioner Specifications:AC Protection


•Voltage Protection Rating (UL 1449 3rd Edition 3000A): 330V
•Under-voltage shutoff: 95V +/ 2V
•Thermal Fusing: Yes
•Single Pulse Energy Dissipation: 2025 Joules
•Response Time: 1ns
•Protection Modes: L-N L-G N-G
•Protect or Disconnect Circuitry: Yes
•Peak Impulse Current: 52000 A
•Over-voltage shutoff: 135V +/ 2V
•Maximum Current Rating: 15A
•Line Voltage: 120V 50/60Hz
•Initial Clamping Level: 200V Peak 141VRMS
•Automatic Voltage Monitoring Circuit: Yes

Linear Level 4 Noise Filtration


•Bank 1 2
•-65dB min. @ 100kHz
•-65dB min. @ 250kHz
•-45dB min. @ 500kHz
•Max filtration: -80dB @ 150kHz


•Bank 3 - High Current Low Impedance
•-50dB min. @ 100kHz
•-60dB min. @ 250kHz
•-45dB min. @ 500kHz
•Max filtration: -63dB @ 250kHz


•Bank-to-Bank (1 vs. 2) Noise Isolation
•-60dB min. @ 100kHz
•-65dB min. @ 250kHz
•-50dB min. @ 500kHz
•Max filtration: -75dB @ 125kHz



General


•Weight: 13.5 lbs.
•Rack Ears: Included
•Dimensions: 12l x 17w x 3.5h 4h with feet

LAN Protection


•Wires Protected: 8-Wires
•Jacks: RJ-45
•Compatibility: 10/100/1000bT
•Clamping Level: 62V +/ 6V @ 1 mA

TEL Protection


•Wires Protected: 2 Wires 1 Pair (4 5)
•Jacks: RJ-11
•Fuseless/Auto-Resetting: Yes
•Clamping Level: 260V

Universal Coax Protection<