schwinn
bikes| Bike Wheel Size | Rider Height (in) | Rider Height (cm) | Rider Age |
|---|---|---|---|
| 12" | 28-30 | 71-97 | 1-4 |
| 14" | 36-40 | 91-102 | 3-4 |
| 16" | 38-48 | 97-122 | 3-7 |
| 18" | 42-52 | 107-132 | 5-9 |
| 20" | 48-60 | 122-152 | 7-13 |
| 24" | 56-66 | 142-168 | 10-15 |
| 26", 27.5", 29", 700c | 64-74 | 163-188 | 14+ |
| Folding Bike | 56-74 | 142-188 | 14+ |
| Standover Height Minimum 1-3 inch clearance between crotch of the intended rider and top tube of the bicycle frame, with both feet flat on the ground | |||
All Sizes in Inches Unless Otherwise Stated
A: Hi Rachel, While we do our best to make training wheels fit as many bikes as possible, there are exceptions to this depending on the design. The design of some bikes, particularly this model, are made with a rear axle that is too short to accept the additional width of training wheels and brackets. It may be possible to have a local bike shop extend the axle to accommodate the training wheels or bike stabilizers may be another option. Thanks!
A: Hi Rachel! While we do our best to make training wheels fit as many bikes as possible, there are exceptions to this depending on the design. The design of some bikes, particularly this model, is made with a rear axle that is too short to accept the additional width of training wheels and brackets. It may be possible to have a local bike shop extend the axle to accommodate the training wheels or bike stabilizers may be another option.
A: Hi. That's a great question. Sadly, some 20" models do not have an axle long enough to safely support training wheels, and you will most likely need a set that mounts to the frame and not the axle. We recommend working with a Professional bike shop to ensure the training wheels are safely attached. They're the experts we rely on when it comes to adding components to a product that was not originally manufactured on the bike, additionally, they'll have all the resources to make sure you get the right training wheelset. Warm Regards.
A: Hi, That's a great question. We recommend visiting a professional bike shop to check the compatibility of your Huffy bike with our Schwinn product. Unfortunately, we cannot guarantee our products are compatible with another brand's bike. Warm Regards,
A: Hi. Great question, most 20' models will not have a long enough axle compatible for training wheels. We recommend visiting a professional bike shop for suggestions on any upgraded or aftermarket replacement parts that are not originally manufactured on our products for safety purposes. They will be able to check into the compatibility of your model and recommend upgraded replacements to safely install on your bike. Best,
A: Hello Cortes! Though our training wheels are designed to fit most 12"-20" models, we can not guarantee this will fit a huffy 20" model. Thank you for reaching out!
A: Hi there! The bracket is about 1.5" in width. Hope this helps!
A: Hi GRP! Yes, these training wheels are made of plastic.
A: Hi Sara, These Schwinn training wheels are great for replacing existing training wheels or compatible with some bicycles. Unfortunately, you will have to check the length of the rear axle (where the training wheels attach) with your intended bicycle. Thanks, Alex
