Deck Board Straightening Tool for Composite Decking Boards, Red

Deck Board Straightening Tool in Metal and Nylon A deck board straightening tool comes down to three things: the structure that carries the load, the face that touches the board, and the place the tool seats while it works. This one is built from metal, so the levering load passes through the frame without the flex that weaker tools show on a stubborn board. The roller is a hard nylon core under a rubber coat, so the board edge is met softly and the pressing force spreads along the side of the board rather than pinning one spot. The base plate is shaped for standard deck joist layout, so it holds that point along a run. The result is a straightening step that reads as one clean motion: press, hold, drive the screws. Composite decking and treated wood boards both take the same tool, and it carries on to hidden fastener systems, wall planks and dock floors. **Features:** Metal Frame: The body carries repeated levering passes without the flex that softer tools show on a stubborn board. Seated On The Joist: The base plate is shaped for standard deck joist layout and holds a steady point along a full run. Rolling Action: The roller spreads pressing force along the board edge rather than pinning a single spot on it. Three-Tone Body: Yellow, black and blue separate the parts of the tool so it is easy to spot and easy to read. Board Surfaces: Composite decking, treated wood decking and hidden fastener systems all take the same tool. **Specifications:** Material: Metal Body, Nylon Roller with Rubber Coat, Rubber Grip Handle End Dimensions: 14.17 x 6.30 x 4.72 in (36 x 16 x 12 cm) Weight: 3.42 lb (1.55 kg) Color: Yellow Application: Composite Decking, Treated Wood Decking, Hidden Fastener Systems, Wall Planks, Dock Floors **Notes:** 1. Check the joist layout of the deck before the first run of boards. 2. Wipe the roller and the base plate after use so the pressing faces stay clean. **Package Content:** 1 x Deck Board Straightening Tool