Copper Pathway Solar Outdoor Single Path Light - Threshold™

A: Make sure the solar panel absorbs sufficient sunlight for 10-12 hours. Keep the solar Panel clean to ensure maximum charging performance

A: Hello - We appreciate your interest in this item.   Firstly you must remove the isolation strip from the compartment below, then place the solar light in an area where it can receive direct sunlight for at least 8 hours each day. Shadowed locations will not allow the battery to charge fully and will reduce the hours of night time lighting. The selected location should not be near night time light sources, such as porch lights, street lights or pool lights, as these may cause the solar light to turn off prematurely. Hope this helps. - Kevin

A: Hello - We appreciate your interest in this item. Your light is not actually missing a bulb! The Copper Pathway Solar Outdoor Single Path Light - Threshold™ features an integrated LED, meaning the bulb is permanently built-in and non-removable. Hope this helps. - Kevin

A: Relocate the ficture or eliminate other light sources (Eg:- Streetlights, Porch lights, Other Solar Lights, etc). Try swapping the batteries from the working lights to the non-working lights (you can use regular batteries just to check if the lights come on).

A: Hello Guest - We appreciate your interest in this Outdoor Single Path Light. The pathway light features an integrated LED bulb for efficient illumination. Hope this helps! – Joe

A: Hi, It depends upon the sunlight it received throughout the day.

A: Hello Leslie - We appreciate your interest in this product. This product is to just put it in the ground. I hope this helps, happy shopping at Target! - Griffin