pool diverter valve

Listings for pool diverter valves typically list plastic-family materials. Common examples shown are PVC and ABS, and some listings simply state "plastic."

Port and thread diameters vary by model. Typical ranges seen in listings include: outer female diameters around 2.375"–2.5", inner female diameters around 1.75"–1.81", outer male diameters about 1.81"–1.8125", and inner male diameters around 1.5". Some left-outlet models list an outer diameter near 1.625" and an inner diameter near 1.375". Always check the specific model dimensions before purchasing.

Pool diverter valves are used to divert, shut off, or mix water flow so you can route or stop water between pool and spa systems, hoses, or other lines.

Handle operation depends on the model: some valves use a simple rotate-to-open/close handle, while 3-way designs often use a press-and-rotate action and include a self-locking handle to hold the selected position.

Typical overall dimensions range roughly from 5"–7" high and about 3.25"–6.25" wide, depending on the model. Listed weights are generally around 0.7–1.4 pounds, varying by design.

Left-outlet 3-way valves often include a barbed outlet for hose connection plus threaded top or right ports. All-female 3-way valves have female (threaded) ports on all sides. Check the product listing to confirm the exact port types.

A ball valve provides simple, precise on/off control of flow with a single turn, while a 3-way diverter valve is designed to route or mix flow between multiple outlets (diverting, shutting off, or mixing lines).