schlage door hardware

Most handlesets fit standard exterior door thicknesses from 1-3/8" to 1-3/4" and offer adjustable backsets for 2-3/8" or 2-3/4" doors (often described as 2-3/8"–2-3/4" adjustable).

Many handlesets are universal (fit right- or left-handed doors) and are designed for easy installation—features often include self-aligning screw holes and the necessary mounting hardware for a single bore hole (some kits even include a screwdriver).

Warranty coverage varies by model. Listings in this selection include 30‑Day Limited Warranties, Lifetime Limited Warranties, and notes that some electronic models have multiple or different warranty time frames—check the specific product listing for the exact warranty details for each model.

Many replacements and handleset installations can be done in about 30 minutes using a screwdriver; some handleset kits even include a screwdriver. Actual time depends on the model and your experience.

Materials in this selection include steel, brass, and brass/bronze alloys, along with other metal components used in handlesets, levers, knobs, and deadbolts.

Security features shown include 1" deadbolts with hardened steel spinning pins, anti-drill plates, and anti-pick pins. Several items are listed as BHMA Grade 1 (Certified Commercial Grade 1) or Grade 1/AAA.

Some locks are fully mechanical and use no batteries, while electronic and Wi‑Fi models are battery powered. Listings show notes such as “Battery: No Battery Used,” “Battery: Required, Not Included,” and examples where the lock uses four AA alkaline batteries.

Code capacity varies by model: some keypad locks ship preset with two user codes, one keypad model is pre‑programmed to allow up to 19 user codes, and certain Wi‑Fi smart deadbolts support scheduling up to 100 access codes—check the specific model for its exact capacity.

Typical handleset components include a decorative deadbolt, matching exterior handle grip, interior passage knob or lever, the deadbolt and latch (with adjustable backset), universal latch hardware for 2-3/8" or 2-3/4" backsets, radius and drive-in faceplates, and basic installation hardware (some listings note a screwdriver included).