stylus for audio technica at lp60

The listings specify three tip shapes: Shibata (2.7 x 0.26 mil), elliptical (0.3 x 0.7 mil), and Microlinear (2.2 x 0.12 mil).

The replacement styli list a vertical tracking force range of 1.8–2.2 g, with 2.0 g noted as the standard setting.

The listings specify a vertical tracking angle of 23 degrees.

The replacement styli use an aluminum pipe cantilever.

Across the listings the frequency response ranges reported include 20–25,000 Hz and 20–23,000 Hz (values vary by specific stylus model).

They use a half‑inch mounting.

The listings mention several nude shank constructions, including nude Shibata, nude round shank, and nude square shank (varies by model).

The listings show a recommended load impedance of 47,000 ohms and an output voltage of 3.5 mV (measured at 1 kHz, 5 cm/sec.).

Channel separation is listed at 22–23 dB (1 kHz). Output channel balance is listed at about 1.5–2.0 dB (1 kHz).

Static compliance is listed as 20 x 10^-6 cm/dyne; dynamic compliance is listed as 7 x 10^-6 to 10 x 10^-6 cm/dyne (measured at 100 Hz). Cartridge weight is listed as 6.1 g.