tow strap hooks or loops

Common types include forged grab hooks and load-bearing D‑rings used on tractor buckets, and S‑hooks (and some stainless‑steel fastener hooks) used on ratchet or retractable tie‑down straps.

Most are bolt‑on attachments that install without drilling or welding. Many listings note that mounting bolts, nuts, and washers are included to complete the installation.

Listings commonly mention rust‑proof or rust‑resistant finishes, powder coating on steel parts, and stainless‑steel fastener hooks on some straps.

Listings often include mounting bolts, nuts, and washers. Some mount kits specify Grade‑8 bolts and lock nuts as part of the hardware.

Listings show G70 forged bucket hooks rated roughly 12,000–15,000 lb, while some grab hooks and 1/2" forged D‑rings list capacities around 4,000–4,700 lb.

Listings commonly show a 2‑inch receiver or a standard 2‑inch square tenon for added towing capability.

Tie‑down straps in these listings show working loads of about 300–1,100 lb and break strengths of roughly 900–3,300 lb. D‑rings and grab hooks are listed with much higher capacities—examples include 4,000–4,700 lb and G70 forged hooks shown at about 12,000–15,000 lb.