Endust LCD & Plasma Wipes 70-ct.: Electronic Cleaners, Alcohol-Free, Anti-Static

1 pack, clean and protect your valuable electronic screens and devices, keeping them in new condition with Endust for electronics screen and electronics cleaning wipes. These pre-moistened and streak-free anti-static wipes will rid your electronic screens of dust, dirt, and fingerprints. Specially formulated to safely clean your lcd and plasma screens, tablets, smartphones, and remote controls. The debris will cling to the fabric on the wipe, rather than leaving the debris on your device, resulting in a flawless, streak-free surface. Each 7" x 5" wipe removes fingerprints, reduces dust build-up, and cleans smudges, leaving a mirror-like shine. Soft, non-abrasive alcohol and ammonia-free formula are specially formulated to safely clean screens and electronic surfaces. Endust for electronics screen and electronics cleaning wipes contain 70-count pre-moistened wipes to clean all household and office electronic surfaces. Directions for use, for best results, use one wipe on smaller devices such as tablets, smartphones, and remote controls. For these smaller devices, allow the wipe to dry slightly and wipe until the wipe is dry. For larger surfaces, such as TV screens and monitors, more than one wipe may be necessary. For all devices, always consult your owner's manual before use. Wipe screen/surface/tablet screen with a wipe. Let air dry, or use a microfiber towel (not included) to speed up drying. Dispose of wipe into a receptacle in accordance with your local recycling and disposal regulations. Never flush wipe. To open the container, flip open the dispensing cap. Locate the end of the first wipe in the center of the roll. Pull the first wipe through a large opening in the lid and pull into a smaller opening. Dispense wipes by pulling the wipe upward and slightly forward. Close dispensing cap tightly after use. When properly sealed, the lid will snap shut to prevent moisture loss. Precaution, to prevent damage and reduce streaks, make sure your device is off and fully cooled down prior to cleaning.