$379.00 when purchased online
Target Online store #3991
About this item
Highlights
- Nude Elliptical Stylus Provides precise tracking and detailed sound reproduction
- Aluminum Cantilever Reduces weight and enhances audio quality, especially in higher frequencies
- Rigid aluminum body minimizes unwanted vibrations and reduces resonance for superior audio quality
- Dual Moving Coils offer excellent channel separation and minimize distortion
- Neodymium magnet and pure iron yoke increase magnetic energy for better sound reproduction
Description
The AT-OC9XEN Dual Moving Coil cartridge with nude elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus thereby minimizing distortion.
Features
•Dual Moving Coil Design
•Low Mass Nude Elliptical Stylus Aluminum Cantilever
•Pre-Threaded Cartridge Body
•Aluminum Body Minimizes Unwanted Vibration
DesignAudio quality is further enhanced by a rigid aluminum body that reduces resonance a neodymium magnet and pure iron yoke that increase the magnetic energy and the low-mass nude elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded enabling it to be mounted to a headshell or integral tonearm with just two screws no nuts required.
What's in the Box
•AT-OC9XEN Dual Moving Coil Cartridge
•Non-Magnetic Screwdriver
•Installation Hardware
Specifications
•Frequency Response: 20-30000 Hz
•Channel Separation: 25 dB (1 kHz)
•Vertical Tracking Angle: 20
•Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
•Stylus Construction: Nude square shank
•Recommended Load Impedance : Min. 100 ohms (when head amplifier is connected)
•Coil Impedance: 12 ohms (1 kHz)
•DC Resistance: 12 ohms
•Coil Inductance: 25 mH (1 kHz)
•Output Voltage: 0.35 mV (at 1 kHz 5 cm/sec)
•Output Channel Balance: 1.5 dB (1 kHz)
•Stylus Shape: Elliptical nude
•Cantilever: Aluminum pipe
•Static Compliance: 20 x 10-6 cm/dyne
•Dynamic Compliance: 9 x 10-6 cm/dyne (100 Hz)
•Mounting: Half-inch
•Cartridge Weight: 7.6 g
•Dimensions (W x H x D): 0.66" x 0.68" 1.01"
•Body Material: Aluminum
•Stylus Size: Nude square shank
•Terminal Pins: Brass
•Type: Dual Moving Coil
Features
•Dual Moving Coil Design
•Low Mass Nude Elliptical Stylus Aluminum Cantilever
•Pre-Threaded Cartridge Body
•Aluminum Body Minimizes Unwanted Vibration
DesignAudio quality is further enhanced by a rigid aluminum body that reduces resonance a neodymium magnet and pure iron yoke that increase the magnetic energy and the low-mass nude elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded enabling it to be mounted to a headshell or integral tonearm with just two screws no nuts required.
What's in the Box
•AT-OC9XEN Dual Moving Coil Cartridge
•Non-Magnetic Screwdriver
•Installation Hardware
Specifications
•Frequency Response: 20-30000 Hz
•Channel Separation: 25 dB (1 kHz)
•Vertical Tracking Angle: 20
•Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
•Stylus Construction: Nude square shank
•Recommended Load Impedance : Min. 100 ohms (when head amplifier is connected)
•Coil Impedance: 12 ohms (1 kHz)
•DC Resistance: 12 ohms
•Coil Inductance: 25 mH (1 kHz)
•Output Voltage: 0.35 mV (at 1 kHz 5 cm/sec)
•Output Channel Balance: 1.5 dB (1 kHz)
•Stylus Shape: Elliptical nude
•Cantilever: Aluminum pipe
•Static Compliance: 20 x 10-6 cm/dyne
•Dynamic Compliance: 9 x 10-6 cm/dyne (100 Hz)
•Mounting: Half-inch
•Cartridge Weight: 7.6 g
•Dimensions (W x H x D): 0.66" x 0.68" 1.01"
•Body Material: Aluminum
•Stylus Size: Nude square shank
•Terminal Pins: Brass
•Type: Dual Moving Coil
Dimensions (Overall): 3 inches (H) x 2 inches (W) x 1 inches (D)
Weight: 1.0 pounds
Electronics Condition: New
Package Quantity: 1
Battery: No Battery Used
Warranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, please call Target Guest Services at 1-800-591-3869
TCIN: 1001268101
UPC: 4961310150433
Origin: made in the USA or imported
The above item details were provided by the Target Plus™ Partner. Target does not represent or warrant that this information is accurate or complete. On occasion, manufacturers may modify their items and update their labels.
We recommend that you do not rely solely on the information presented. If you have a specific question about this item, you may consult the item's label, contact the manufacturer directly or call Target Guest Services at 1-800-591-3869.
If the item details above aren’t accurate or complete, we want to know about it.
Shipping details
Estimated ship dimensions: 4 inches length x 2 inches width x 4 inches height
Estimated ship weight: 1 pounds
This item cannot be shipped to the following locations: American Samoa (see also separate entry under AS), Guam (see also separate entry under GU), Northern Mariana Islands, Puerto Rico (see also separate entry under PR), United States Minor Outlying Islands, Virgin Islands, U.S., APO/FPO, Alaska, Hawaii
item ships from third party seller: WORLD WIDE STEREO
Return details
This item can be returned to any Target store or Target.com.
This item must be returned within 30 days of the date it was purchased in store, shipped, delivered by a Shipt shopper, or made ready for pickup.
See the return policy for complete information.