$169.00 when purchased online
Target Online store #3991
About this item
Highlights
- Elliptical bonded stylus (0.3 x 0.7 mil) tracks the record groove with accuracy for outstanding audio reproduction
- Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response
- Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum
- OFC (oxygen-free copper) lead wires for exceptional sound quality
- Elongated through holes enable precise cartridge positioning and overhang adjustment
Description
The AT-VM520xEB/H combo kit includes the AT-VM520xEB elliptical bonded dual moving magnet cartridge premounted on the AT-LT10 universal 1/2"-mount headshell. The AT-VM520xEB is part of the updated AT-VMx series which introduces material and design changes to further refine the VM sound offering responsive playback that is especially sensitive to the dynamism of musical expression.
FeaturesAT-VMx Dual Moving Magnet Cartridge
•Elliptical Bonded Stylus (0.3 x 0.7 mil)
•Paratoroidal Coils Improve Channel Separation Channel Balance and Transient Response
•Center Shield Plate Reduces Crosstalk
•Durable Low-Resonance Polymer Housing
•Aluminum Cantilever
•Compatible with Any Turntable Headshell That Accepts 1/2 Cartridges
AT-LT10 Universal -Mount Headshell
•For 4-Pin Turntable Cartridges with or Without Threaded Inserts
•Ultra-Lightweight Aluminum Die-Cast Body Keeps Vibration to the Bare Minimum
•Elongated Through Holes Enable Precise Cartridge Positioning and Overhang Adjustment
•OFC (Oxygen-Free Copper) Lead Wires for Exceptional Sound Quality
•Slip-Resistant Finger Lift Allows Stylus to Be Placed Precisely on the Record
•Includes Mounting Screws
What's in the Box
•AT-VM520xEB/H VMx Headshell Dual MM Cartridge Combo Kit
•Installation Hardware
•Manual
Specifications
•Type: VM
•Frequency response: 20 to 20000 Hz
•Output voltage: 5.0 mV (1 kHz 5 cm/sec.)
•Channel separation: 24 dB (1 kHz)
•Output balance: 1.5 dB (1 kHz)
•Tracking force: 1.8 to 2.2 g (2.0 g standard)
•Coil impedance: 3.2 k ohms (1 kHz)
•DC resistance: 750 ohms
•Recommended load impedance: 47 k ohms
•Recommended load capacitance: 150 to 250 pF
•Coil inductance: 480 mH (1 kHz)
•Static compliance: 23 10-6 cm/dyne
•Dynamic compliance: 7 10-6 cm/dyne (100 Hz)
•Stylus: Elliptical bonded
•Stylus: curvature radius 0.3 0.7 mil
•Cantilever: Aluminum pipe
•Vertical tracking angle: 20
•Dimensions: 2.7 0.73 0.85
•Weight: 18.3 g (0.65 oz)
•Replacement stylus (sold separately): AT-VMN20xEB
FeaturesAT-VMx Dual Moving Magnet Cartridge
•Elliptical Bonded Stylus (0.3 x 0.7 mil)
•Paratoroidal Coils Improve Channel Separation Channel Balance and Transient Response
•Center Shield Plate Reduces Crosstalk
•Durable Low-Resonance Polymer Housing
•Aluminum Cantilever
•Compatible with Any Turntable Headshell That Accepts 1/2 Cartridges
AT-LT10 Universal -Mount Headshell
•For 4-Pin Turntable Cartridges with or Without Threaded Inserts
•Ultra-Lightweight Aluminum Die-Cast Body Keeps Vibration to the Bare Minimum
•Elongated Through Holes Enable Precise Cartridge Positioning and Overhang Adjustment
•OFC (Oxygen-Free Copper) Lead Wires for Exceptional Sound Quality
•Slip-Resistant Finger Lift Allows Stylus to Be Placed Precisely on the Record
•Includes Mounting Screws
What's in the Box
•AT-VM520xEB/H VMx Headshell Dual MM Cartridge Combo Kit
•Installation Hardware
•Manual
Specifications
•Type: VM
•Frequency response: 20 to 20000 Hz
•Output voltage: 5.0 mV (1 kHz 5 cm/sec.)
•Channel separation: 24 dB (1 kHz)
•Output balance: 1.5 dB (1 kHz)
•Tracking force: 1.8 to 2.2 g (2.0 g standard)
•Coil impedance: 3.2 k ohms (1 kHz)
•DC resistance: 750 ohms
•Recommended load impedance: 47 k ohms
•Recommended load capacitance: 150 to 250 pF
•Coil inductance: 480 mH (1 kHz)
•Static compliance: 23 10-6 cm/dyne
•Dynamic compliance: 7 10-6 cm/dyne (100 Hz)
•Stylus: Elliptical bonded
•Stylus: curvature radius 0.3 0.7 mil
•Cantilever: Aluminum pipe
•Vertical tracking angle: 20
•Dimensions: 2.7 0.73 0.85
•Weight: 18.3 g (0.65 oz)
•Replacement stylus (sold separately): AT-VMN20xEB
Dimensions (Overall): 2.7 inches (H) x .73 inches (W) x .85 inches (D)
Weight: .04 pounds
Electronics Condition: New
Package Quantity: 1
Battery: No Battery Used
Warranty: 1 Year Limited Warranty. To obtain a copy of the manufacturer's or supplier's warranty for this item prior to purchasing the item, please call Target Guest Services at 1-800-591-3869
TCIN: 1003619484
UPC: 4961310163327
Origin: made in the USA or imported
The above item details were provided by the Target Plus™ Partner. Target does not represent or warrant that this information is accurate or complete. On occasion, manufacturers may modify their items and update their labels.
We recommend that you do not rely solely on the information presented. If you have a specific question about this item, you may consult the item's label, contact the manufacturer directly or call Target Guest Services at 1-800-591-3869.
If the item details above aren’t accurate or complete, we want to know about it.
Shipping details
Estimated ship dimensions: 4 inches length x 3 inches width x 5 inches height
Estimated ship weight: 0.2 pounds
This item cannot be shipped to the following locations: American Samoa (see also separate entry under AS), Guam (see also separate entry under GU), Northern Mariana Islands, Puerto Rico (see also separate entry under PR), United States Minor Outlying Islands, Virgin Islands, U.S., APO/FPO, Alaska, Hawaii
item ships from third party seller: WORLD WIDE STEREO
Return details
This item can be returned to any Target store or Target.com.
This item must be returned within 30 days of the date it was purchased in store, shipped, delivered by a Shipt shopper, or made ready for pickup.
See the return policy for complete information.