A: Our Tailored Pleated Bed Skirt has only three sides; there is no skirt at the head of the bed.

A: This Microfiber Bed Skirt does not have elastic and is designed to lay on top of the box spring to go in between this and the mattress.

A: Our Tailored Bed Skirt will not work with a footboard or anything that will extend beyond the expected frame of a bed, vertically or horizontally. There is not a split at the corner of this Bed Skirt; the sides of this item will wrap around the foot end of the bed approximately 3"-4" underneath the end piece of fabric. It will work on a bed frame without a footboard.

A: Our Tailored Pleated Bed Skirt has only three sides; there is no skirt at the head of the bed.

A: Our Microfiber Bed Skirts do not have split corners that would fit around a foot board.

A: Our bed skirts are not recommended for adjustable beds, as it will not stay in place as one would expect.

A: In terms of color depth, our Taupe is darker than light and lends itself to a brown tone rather than grey.

A: Our entire Bed Skirt is made from the same fabric and in a monochromatic color.

A: Yes, it should work. Our bed skirts are one full piece with a flat part that typically goes between the mattress and box spring and the drop sides are 14-15" long, so as long as your platform would work with those dimensions you should be fine!

A: Our Bed Skirt has inverted pleats at the corners but is not open from the side to the foot of the bed. The fabric from the side panels will round the end of the bed about 4 inches to continue behind the main fabric panel at the foot of the bed. While this Bed Skirt appears to have split corners, this is an inverted pleat with fabric underneath; unfortunately it will not work with a footboard.