GEMS Pat Pat Light - Cat

A: Hi, thanks for reaching out about GEMS Pat Pat Light. Based on the product description, it is supposed to have"simple touch control" and 3 brightness levels, meaning touching/patting the silicone light should cycle through the brightness settings without needing to pick it up. If yours only changes brightness when you lift it and set it back down, a few possibilities are: The sensor may actually be responding more to a tap/impact than a light touch. The batteries may be weak or not making solid contact. The touch sensor could be defective or less sensitive than intended. Some "pat-pat" lights use an internal vibration/tap sensor rather than a true capacitive touch sensor, so a firm pat can work better than a gentle touch. I'd try: Giving the top or side a slightly firmer tap while it sits on the table. Replacing the AAA batteries with fresh ones. Testing it on different surfaces (hard table vs. soft surface). If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi, thanks for reaching out about GEMS Pat Pat Light. Copilot said: Yes, generally it appears designed to be used as a small night light. The GEMS Pat Pat Light uses a low-power integrated LED (about 0.8 W), has a soft silicone exterior, and is marketed for bedrooms and bedside use. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.