Hunter Fans 46" Anslee Lighted Ceiling Fan Premier Bronze American Walnut 5 Blades Flush Mount LED Dimmable

The fan itself is of high quality, but the installation experience is not. 1. Installing the blades is very difficult because it's challenging to line up the holes in the blades to the holes in the motor arms that hold them while screwing them together. 2. Installing the light kit underneath is very hard because the hole for the third assembly screw is both difficult to see (as it's a couple of inches up into the housing) and extraordinarily hard to access (imagine balancing a screw atop a screwdriver, dodging through wiring, to a hole that's barely visible and may be misaligned). 3. The 9-pin plug connector is difficult to connect because there's not enough slack in the wiring to be able to manipulate the plugs within the tight housing. Lastly, it seems like a design flaw that the glass globe needs to be removed in order to reverse the fan direction.

I love it! Perfect size and installed pretty easily!

The old fan I took down was so heavy and bulky. This fan is the perfect size and is so much lighter! The 46” is perfect for my small living room. It’s very quiet and of course has a great cool breeze!

Had Master Electrician hang fan. Light did not work and he confirmed it was fan, not wall switch. Promptly notified Hunter. Over several days Hunter asked questions, but no offer to replace anything. Do not buy!

I purchased this fan a year ago for my bedroom. I have been so pleased with it that I purchased two more recently for other rooms in my home. It is quiet, efficient and very stylish.

looks great..bright light…four stars if it had a remote room is 11 by 9. great airflow.

This is a very quiet fan that was pretty easy to install. It sits fairly close to my ceiling and moves a lot of air.

I bought five of these fans, different sizes for a remodel of my home. They look great. I didn’t see ANY notifications in description that “TO REVERSE BLADES you need to remove the light”. Electrician brought to my attention. I would not have purchased these if I was aware of this feature (or lack of). I see broken glass in my future come summer.

This is a sweet fan for a small bedroom—quiet, hugs the ceiling. We’ve bought lots of Hunter fans over the years and none has disappointed. This is no exception.

This is a good quality fan for the price it is sold for. It's not as quiet as my other Hunter fan that I just replaced but it gives me the headroom I need. The wiring instructions are obviously for a modern home but I figured it out. I won't take this fan with me when we move because it was too hard to get those fan blades on.

Nice looking light, better than expected BUT the actual light put out is minimal. The frosted globe mutes the light way too much. A bit of a waste since i now have to buy more light fixtures for the room. Defeated the purpose of buying an led light.

Quiet fan with great output. Installation was definitely a 2 person job - especially with the blades being in the housing, but overall was fairly easy.

It had class look to room. Hunter brand means you're getting good quality.

I really like this fan, the way it looks and it's nice and quiet. It was however, the most difficult fan I have installed especially the blades. Because you have to attach the blades inside the housing it is difficult to line everything up to screw the blades in place.

We bought this fan for our bedroom and we are very satisfied. It looks fabulous, moves a ton of air, is absolutely silent, and the light is surprisingly bright. A word to the not so "DIY'y" though...the installation is not for the feint of heart! Whoever designed the installation process and the instructions needs taken out behind the woodshed. Not good. I have apologized many times to my wife for enduring that with me. One other thing. During the installation we somehow cracked the globe. A quick search turned up no results and according to reviews above, there may not be a replacement globe available. Not good. I have emailed the company and will keep you updated. I am hoping that because it's Hunter and not a chinese knockoff they will come through for us.

Very Nice, quiet, don't see any screws or brackets. Really like it so far. Directions for assembly were accurate and all parts included.

Just installed the fan today. Everything works great! It would have been helpful if the wiring diagram was correct. The one provided showed a green/yellow-stripe wire coming from the top housing canopy (pg 4), but this wire does not exist on this unit. It appears that the ground wire is now attached to the ceiling bracket which is where I attached to the house ground. I really hope this is correct! Also, installation of the screws for the light assembly is extremely tricky due to the many wires, capacitor, and connections in the light housing. From the assembly diagram (pg 7), it looks like the light wiring assembly is easily accessed because all the components are not shown. In reality, the assembly is packed full of components that are difficult to move out of the way to tighten the mounting screws. This was made even more difficult by the coloring of the screws (black) and the interior of the light assembly (also black) which made it almost impossible to see the screws. I eventually got everything assembled, and the Fan works flawlessly. Love the design, but hated the assembly.

This is not our first fan install. This one was really difficult. After finally installing it it turning the power on...... nothing!! No power to the fan or lights. The we did all the trouble shooting..... nothing! took the thing apart and installed it again! Still nothing. What a pain! Now we have to return it

I liked the low profile design, and general installation process, however, it took me 1.5 hours to install! 1. The screws that attach the light kit to the fan are tucked between a nest of wires, and are a significant pain to get to. 2. DO NOT LET THE PULL CHAIN DROP BACK INTO THE BODY OF THE LIGHT KIT (prior to attaching the pull chain extensions). Your 2 options: undo the painful step referenced in step 1 to re-route the chain, or fish it back through the 2(!) holes. Both are difficult, and will quickly cause the install time to balloon. The final result is a nice looking fan that really pushes some air. The LEDs are a little dim, so either look for a 3-light, or get stronger bulbs.

Installing the light to the fan base was a exceedingly difficult. The hodge-podge of wire gets in the way. .