Kenwood P-XW1241S Single 12" Subwoofer in a Vented Enclosure and includes a X502-1 1000W Max Power eXcelon Class D Mono Amplifier

Kenwood P-XW1241S Single 12" Subwoofer in a Vented Enclosure and includes a X502-1 1000W Max Power eXcelon Class D Mono Amplifier- This bundle includes Kenwood P-XW1241S Single 12" Vented Enclosure, 300W RMS Power, a Kenwood X502-1 eXcelon Class D Mono Power Amp, 500Wx1 @ 2 ohms, a pry kit, and a Creative Audio coozy. Kenwood P-XW1241S Single 12" Vented Enclosure, 300W RMS Power Features - • Ported enclosure with one 4-ohm 12" subwoofer • Polypropylene cone with diamond array pattern and rubber surround • Stress controlled spider • Closed yoke speaker design for airflow control • 5/8" MDF construction with 3/4" MDF baffle board • Can be installed as front-, rear-, or down-firing Box Contents - • Ported enclosure loaded with one 12" Excelon subwoofer (4 ohm) • 2 Mounting brackets • Eight 1" screws Kenwood X502-1 eXcelon Class D Mono Power Amp, 500Wx1 @ 2 ohms Features - • Max Power 1000W • Size (inch) (W) 8-3/8" x (H) 2-1/16" x (D) 5-7/8" • Variable Low Pass Filter • Bass Boost • Optional Wired Remote Ready • Max Power: 1000W • RMS POWER OUTPUT (4Ω): 300W • RMS POWER OUTPUT (2Ω): 500W • Speaker Level Input • Signal Sensing Turn-On • Infrasonic Filter Specifications - • Signal to Noise Ratio: 100dB (Reference: Rated Power into 4Ohms at 14.4V) • Frequency Response: 20Hz-200Hz (+0dB, -3dB) • Input Impedance: 10k ohm • Speaker Impedance: 4Ω (2Ω to 8Ω allowable) • RCA Input Sensitivity: 0.2[V] - 5.0 [V] • Speaker Level Input Sensitivity: 4.0[V] - 12.0 [V] Terminals - • Battery & Ground: M6 Screw Type Terminal Block • Speaker Output: M4 Screw Type Terminal Block