LotFancy Go Kart Clutch 3/4 Bore 12T for #35 Chain, Predator 212 Engine Centrifugal Clutch

This go-kart clutch is made of high-grade steel, heavy-duty and long-lasting. It can withstand the strain and heat caused by friction, once the clutch engages. Go-kart clutches work best on these types of go-karts: racing Go-Kart and homemade Go-Karts. Specification: 12 tooth 3/4" bore, For # 35 Chain Bolt Size: 5/16-24, 3/4" Long Easy to install: Mounts onto crankshaft using bolt and washer on the end of the crankshaft. Compatibility: This Clutch Will Fit 2 - 6.5 HP Engines Honda GC160, GC190, GX120, GX140, GX160, GX200 Also will fit Briggs & Stratton and 2 - 6.5 HP With 3/4" Shaft Also Will Fit Tecumseh Engines 2 - 6.5 HP With 3/4" Shaft And Any Other Engines With 3/4 Crank Shaft and 3/16" Key Way NOTE: The Centrifugal Clutch 3/4" needs to be oiled before use. Before ordering please check your crankshaft size. Can only be used on Go Kart for children under 10 years old and at speeds below 30 yards. Oiling your clutch the right way will increase its lifetime significantly. Choose 10 or 12 tooth clutch? It depends on the purpose of your Go-kart, the number of teeth in your axle sprocket, and the tire size. If you have big tires (more than 13″) in your go-kart then it will be better to use a 10T clutch, if your go-kart is built for racing purposes then you can choose the 12T.