Mount-It! Single Monitor Arm Mount | Desk Stand | Heavy Duty Full Motion Height Adjustable | Fits 13 - 30 in Compatible Computer Screen | C-Clamp Base

The mount is well made and sturdy. On my desk (an AnthroCart Elevate standing desk), the desktop's surface is very subtly textured and very solid. I noticed that even when fully tightened, the clamp can rotate if an off-center force is applied to the arm, perhaps because the desktop does not deform under the force of the clamp. I don't move the arm often, so I'm watching to see if I need to add a non-slip insert (e.g. coarse sandpaper) between the clamp's jaws and the desk surface to stop this rotation and prevent the clamp from working its way off the edge.

I was initially interested because of the very competitive price. After spending some time on the website and videos I decided to purchase. When it arrived, I was impressed by the quality, the heft of the mount. It only took 10 minutes to set up, and I'm very happy with it.

I had high hopes for this monitor stand. I attached my 22\ HP monitor to it without any issues

arms are sturdy and it comes with some ways to handle wires. The base is a bit long, but it makes sense due to its ability to balance large monitors. Oddly, my two monitors are exactly the same (both the 23" of same model/brand) yet they are uneven (just over 3/4"). The arms are exactly the same height at the 'elbow' but for whatever reason, the left monitor is visibly shorter by 3/4 inch. Yes, the monitors are level. They're off by about 1/2 inch just behind where the arms attach to the monitors and increases at the monitors. I might have to return them.

Tilt adjustment is from 0 to -15. So, your monitor basically is straight with no way to slightly turn it facing up, which is very annoying.

Solid mount for my 24" monitor! Would recommend this to anyone looking for a mount for their desk!

Works well enough for my Samsung C32HG70, but I think it is pushing the limits. Installation was difficult due to the weight of this monitor. I had to use the Allen wrench bolts to hold the tilting mechanism in place, the thumb screws simply could not be tightened enough to hold the monitor in place. This means you shouldn't expect to be able to easily manoeuvre the tilt of the monitor. Once you get it to where you want it you'll need to spend much effort holding it in place while you tighten the tilting mechanism. Also, don't expect to be able to pull you monitor out very far as the weight of the monitor will cause the arm to sag.

sturdy monitor mount. 33lbs max monitor weight. can support 30lbs 43" monitor.

Thought this stand would work good for my Phillips 4K BDM4037U display. The original monitor stand that came with it was rigid and could not be adjusted much at all, plus it kept the monitor position higher than I wanted. I was encouraged to see this stand and thought that it would allow me to lower my monitor as well as provide more position flexibility with the swivel arm as well. Unfortunately, the VESA mounts on my monitor in relation to the arm position of the Mount It stand did not provide much more lowering distance. I basically have the stand all the way down and only gained about another 1/2 inch lower than the original stand. I was hoping to be able to lower it down further. Granted, I did gain more flexibility with the monitor positioning,One other problem with this stand is that VESA mount point on the stand itself is not very good at keeping the monitor from tilting forward. I had to wedge some business cards behind the stand and the monitor to keep it from tilting too much. I had seen others comment on this as well and I can confirm that I have the same issue with it.On the plus side, the clamp, arm, and pole of the stand are very solid and sturdy. The desk clamp holds the monitor stand without any slop or wobble. The swivel arm is also very sturdy. The weakest link is the tilt hinge just behind the VESA mount plate.

I love this monitor mount so much that I bought three of them I use one to mount a 24'' TV to a countertop with in my kitchen for my wife. I've used one to attach a 24' ultra wide monitor monitor to a self built standing desk in my office. Then I used one to attach a 15" monitor in my garage for server monitoring.

So far so good. Although I'm using it to hold a 40\ tv

The mount itself was really easy to install and seems very sturdy. I have it mounted on an IKEA kallax desk - which seems to be about the right thickness to support the mount and monitor.For those who are looking for a mount for the Samsung UHD 28\ monitor (U28E590D): it was a bit tricky to install the monitor to the mount because it is very difficult to remove the stand to this monitor. I was able to easily remove the bottom part of the stand but could not remove the piece that connects the monitor to the bottom portion of the stand. This actually turned out to be beneficial

Finished setting this up about 10 minutes ago. The swing is pretty great, doesn't get caught up on itself when swinging 180 like another stand I own. I had to loosen and adjust my 21\ monitor ever so slightly once it was placed in its primary position

Maybe this would work out better with someone else. The product itself is pretty sturdy and can handle the 34\ LG ultrawide and 24\" Acer I have on there

This works great, holding twin 27\ monitors securely above my desk at the proper height for work. There is no slippage

Amazing product for a great price. couldn't be happier

I'm using a 29\ ultra wide with this arm. I'm pretty sure its outside the recommended size

I purchased this after getting a new desk, where my older dual monitor mount with the clamp attachment would not work. I wanted one with both a grommet attachment as well as a base, in case I did not like the monitor placement from using the grommet. I ended up attaching this to my desk with the grommet.As other reviewers mentioned, it is not perfectly level between the two arms. When I have both monitors mounted and side-by-side, there is a 1-2cm difference between left and right monitor height. On initial setup it really annoyed me, but after a week, it doesn't bother me at all anymore. I did not try to adjust the rotation of the main support pole to find an ideal \lean\" to even out the arms as did another reviewer

I used the product to mount two 24\ Samsung smart TV's that I use for monitors

I opted for a \Like New\" version from deals. I have had good luck in the past with them. Unfortunately