Nektar Impact LX88+

The Impact LX88+ is a USB MIDI controller designed for keyboard players looking for extra reach. It's packed with intelligent, expressive performance control and hooks up automatically to DAW. If prefer to control MIDI hardware, use the build-in MIDI Out as well as the extensive MIDI programing options. Nektar DAW Integration, custom-designed for most of the popular DAWs, takes Impact LX88+ beyond functionality normally offered by a MIDI controller keyboard. Split, Layer and Transpose ButtonsThe Impact LX88+ keyboard can send on up to 3 zones at once. Each zone can be programmed to send on its own unique MIDI channel with essential settings either pre-programmed or adjustable during performance. Pads For groove and beat creation, Impact LX88+'s 8 velocity sensitive pads make life easy. Calibrated to trigger at a light touch, finger drumming is suddenly well within reach with a nice and even velocity response. Each pad can be assigned any MIDI note number or MIDI cc message for use as MIDI trigger or toggle buttons. But the best part is the "Pad Learn“ feature, which allows to just select a pad, play the note or drum sound want on the keyboard and assignment is done. Control Center Nine 30mm faders, 9 MIDI buttons and 8 encoders are at the center of Impact LX88+'s control panel. Each control is fully programmable to send any MIDI CC message for use with hardware or software MIDI products. Used with Nektar DAW integration, the controls take on a life of their own, providing pre-mapped DAW control giving the best of both worlds. Control settings can be stored in any of the 5 Impact LX88+ presets for recall. LED ButtonsThe 9 LED buttons can be programmed with a variety of MIDI messages including sending specific MIDI Program changes. The last MIDI Program message sent is remembered so a corresponding LED button illuminates correctly, even if Program was sent via, for example, the transpose buttons or the Setup menu. can also assign the 8 pads to send Program messages so 'll have instant access to 17 buttons without changing preset or pad map. DAW Integration Impact LX88+ software integration supports most of the popular DAWs. A common workflow gives access to many of the functions are most likely to need when recording and performing with Impact LX88+. Impact LX88+ DAW integration currently supports Cubase, Digital Performer, FL Studio, Garageband, Logic, Nuendo, Reaper, Reason, Sonar and Studio One. Buttons and controls are labeled so don't have to remember how they are assigned. That’s why Impact LX88+ is a breeze to use but with enough extra features under the hood to challenge even the most experienced power user.Transport and Navigation The 6 dedicated transport buttons are always within reach and mapped to control Cycle, Rewind, Forward, Stop, Play and Record. Press Shift to get access to alternate functions such as Goto L, Set L, Set R, Undo, Click and Mode. Dedicated Track up/down and Patch up/down buttons are located below the display.Mixer Press mixer and the first 8 Impact LX+ faders are assigned to control 8 channels of DAWs mixer. The alternate Bank up/down function moves control assignments to the next or previous group of 8 channels. The 9th fader is assigned to the currently selected channel so always know where to find it. The buttons under the faders follow the channel assignment of their corresponding fader and can control Mute or Solo with LED's clearly indicating current status. Pan for the group of 8 channels controlled by the faders is handled by the 8 pots. Fader 9 is used for control volume of the current mixer channel as well as master volume