Q&A(20)
Q: How can you take the shelves down to move them?
A: Perhaps do the reverse of the instructions when putting it together? Unscrew the screws at the bottom first. This would likely free the shelf from the bracket. Once the shelf is removed, you can just unscrew all the screws that hold the bracket in place. The plastic anchors though may have to be pushed into the wall [to drop them into the space between walls - that would be their grave unless you do some massive remodeling] if you can't pull them out. You just have to purchase new anchors. This is just a guess btw. I am just in the process of mounting mine so I haven't really tried taking it down yet. (Note: I'm not an expert)
submitted byInteriorDesignerWannaBe - 7 years agoA: Hi Amickay - Thanks for the question. The shelves and mounting hardware can both be removed and reinstalled in a different place if you decide to move them. Have a great day! - Matt
submitted byguest services - 7 years agoTarget staff support
Q: Can the 24" shelf hold a mix of hardcover and paperback books?
A: Hello CL- This lovely shelf will be a great addition to any room. The dimensions are 1.750 inches H x 24.000 inches W x 7.75 inches D and the maximum weight capacity is 12 pounds. Thanks for reaching out. -Kayla
submitted byKayla - 8 years agoTarget staff supportA: Hello CL- This lovely shelf will be a great addition to any room. The dimensions are 1.750 inches H x 24.000 inches W x 7.75 inches D and the maximum weight capacity is 12 pounds. Thanks for reaching out. –Kayla
submitted byKayla - 8 years agoTarget staff support
Q: Do you need to put a bunch of nails in the Wall to hold this up or is there another way to keep it up
A: Hello John - Thank you for your question. The bracket used for this shelf is the rod system. Chrome mounting hardware are included. Hope this helps. - Nikitha
submitted byNikitha - 9 months agoTarget staff support
Q: Step 4. Install screws (C) into anchors (A), there is one anchor per side. Per side of bracket, 2? Per side of each rod, all 4? If I use 1 of the long stud mount screws (D), should it be the center?
A: Hello - Thank you for reaching out with your questions. We recommend installing anchors for each 30mm Phillips head screw, there are 2 on each side and one center. Step 2 shows where these slots are on the metal bracket. You may choose to stud mount your shelf as well for additional security, any of the slots in metal bracket are workable as long as you are drilling 2 of these stud screws into a stud in your wall. If this is not the case feel free to continue with the standard installation using the 5 anchors, 5 30mm Phillips head screws, and 2 19mm Phillips head screws. It is not necessary to utilize the 50 mm stud screws, these are included for the option of stud mounting. I hope this information is helpful. Thank for shopping with us! - Carmen
submitted byCarmen - 2 years agoTarget staff support
Q: will this hold up an Xbox S?
A: Hi- This will hold up to 12 pounds.-Stacie
submitted byStacie - 3 years agoTarget staff support
Q: Can these shelves be installed in a humid bathroom?
A: Hello Rachael93 - Our shelving is tested to a certain moisture content- to not exceed 10%. If the bathroom isn’t properly ventilated with a fan I’d suggest not putting them in that bathroom. - Tanisha
submitted byTanisha - 3 years agoTarget staff support
Q: Can the sides be trimmed 1/2” off each side? I want to add it as a shelf between two cabinets but only have 35”
A: Hi Sherrie – This wall shelf is perfect to display your favorite items. We don’t recommend altering this item and for it to be used as is. We hope you find what you’re looking for! - Phonsavanh
submitted byPhonsavanh - 4 years agoTarget staff support
Q: I’m interested in putting this in an inside corner. Can I miter shelves to put two together?
A: Hi Tanya - This is the perfect shelf to hold special keepsakes to help decorate your home. We do recommend that you keep it as it was designed. If you're in need of a corner shelf, please check out the selection we have on Target.com. Thanks for asking. - Heather
submitted byHeather - 4 years agoTarget staff support
Q: What size and type are the screws that hold the shelf onto the bracket? The ones that go underneath the shelf and screw through the bottom and up into the supporting rods are the ones I’m referring to. Please advise.
A: Hi Asiakhamile - Thanks for viewing our shelving! The chrome mouthing hardware is included. These screws are a Phillips head 6mmx15mm screw. Thanks for dropping by. – Anita
submitted byAnita - 5 years agoTarget staff support
Q: Shelf won't click into click into the wall mounting. It's bowed a little, not sure if that's the problem. Any advice on how to get the shelf to click into the wall brackets?
A: Hi Amanda - Great question! The bracket used for this shelf is the rod system. I recommend checking out the "guest reviews" you may find other guests' thoughts, and opinions helpful. Thanks for stopping by! - Julie
submitted byJulie - 6 years agoTarget staff support