large kitchen cabinet pulls

Common center-to-center measurements in this selection are approximately 6.31 in (160 mm), 5.00 in (128 mm), 3.75 in (96 mm), and 2.50 in (64 mm).

Overall lengths listed range from about 4.53 inches up to 8.62 inches, with many of the larger pulls falling roughly between 6.88 and 8.62 inches.

Common package quantities in these listings are 10-piece packs, 5-piece packs, and 4-piece packs.

Warranties vary across the selection: several zinc pulls list a Lifetime Limited Warranty, while some brass pulls list a 30-Day Limited Warranty.

For pulls that list a 6.31-inch center-to-center spacing, the overall lengths shown in these listings include about 6.88 inches, 7.06 inches, and 8.62 inches — i.e., the overall length is larger than the center-to-center measurement by several tenths to over an inch in these examples.

The brass pulls in these listings include two sizes of M4 machine screws: M4 x 25mm (about 1 inch) and M4 x 40mm (about 1-9/16 inches).

Metric center-to-center sizes shown include 96 mm, 160 mm, 128 mm, and 64 mm.

Weights in the selection range from about 0.17 pounds up to 1.9 pounds, with several zinc pulls listed around 0.19–0.45 pounds and heavier brass pulls above about 1.2 pounds.