Vivitar LED Light Strip

A: Hi Matilda, thanks for reaching out about Vivitar LED Light Strip. Yes, with most Vivitar LED Light Strips, if you cut the strip at the designated cut marks, each section can potentially work, but only if you provide power to each section. Here's a breakdown: Cut Marks are Key: LED light strips are designed with specific "cut marks" or "cut lines." These are usually indicated by a small pair of scissors icon, a black line, or copper pads (like small circles or squares). You must cut only at these points. Cutting anywhere else will damage the circuit and render that portion of the strip unusable. Power is Required: An LED strip works by having a continuous circuit. The section attached to the USB (or power supply) works because it's receiving power. When you cut the strip, you're breaking that circuit for the subsequent sections. How to Make Cut Sections Work: To make the cut sections work, you'll need to: Identify the copper contacts: At each cut point, you'll see small copper pads. These are the electrical connection points. Use connectors or solder: You'll need special LED strip connectors (often clip-on or solder-less connectors) or soldering skills to attach a new power source (like another USB cable or a dedicated LED power adapter) to these copper contacts. Make sure to match the positive (+) and negative (-) connections correctly. Ensure adequate power: If you plan to power multiple cut sections, you'll need to ensure your power supply (USB adapter or dedicated LED power supply) has enough wattage/amperage to power all the sections combined. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Tulalilisa, thanks for reaching out about Vivitar LED Light Strip Yes, a Vivitar LED light strip, specifically the Vivitar LED USB Light Strip RGB Color 6ft (Trimable) can be cut to your desired length. It is designed with cut lines, usually every few inches, allowing you to shorten the strip without damaging it. Always cut at the designated cut points marked by scissor icons or copper pads. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi I hate cheap crap, thanks for reaching out about the Vivitar LED Light Strip Vivitar LED Light Strip is powered using a USB-powered connection. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day between 7 am and 11 pm CST.