Elac MRC501 Miracord 50 Turntable (Gloss Black)

The Miracord 50 Turntable is a testament to ELAC's unwavering commitment to precision engineering and a passion for music that transcends time. It seamlessly blends cutting-edge technology with the timeless appeal of vinyl providing audiophiles and music enthusiasts alike with an immersive journey into the heart of their favorite tunes.

Anti-Resonance ChassisSuperior isolation is achieved with a chassis designed to minimize the sonic effects of vibration and feedback. A low-noise DC servo motor drives a die-cast high-inertia aluminum platter with special record mat via a rubber belt resulting in stable speed and minimal wow and flutter.

Damped PlatterThe underside of the platter is covered with strategically-placed elastomer damping material. Not only does this material drastically reduce the platter resonance (the RING when the platter is tapped) but due to the increased mass it also increases rotational inertia improving speed accuracy. An undamped platter will ring like a bell and that resonant energy is transferred through the vinyl back to the phono cartridge resulting in distortion.

Servo Speed ControlA sensor and motor control circuit measures the actual platter speed at the bearing and corrects it instantaneously in a closed-loop feedback system. This technique improves the Model 50s wow and flutter specification by over 50% and speed accuracy by 66% over the simple belt drive and DC motor.

Precision Tonearm and CartridgeThe tonearm is a static-balance straight-tube design with precision bearings built-in anti-skate adjustment and removable bayonet-style headshell. A premounted moving-magnet cartridge takes all the guesswork out of setup and assures proper vertical tracking angle tracking weight and azimuth adjustment right out of the box.

Built-in Phono Equalizer AmplifierUnlike most turntables the Miracord 50 comes complete with a built-in defeatable phono preamp for correct RIAA equalization. That means you can add LP playback without having to add a costly phono stage to line-level preamps or digital-only systems. Just plug it in put on a record and enjoy rich LP sound!

High-Tolerance Main Bearing AssemblyThe motor servo sensor for the speed feedback is integrated into an improved main bearing assembly. The platter rests on this bearing so it takes not only the vertical load of the platter mass plus the record it also has to resist the torque applied to it via the drive belt and motor pulling laterally against it. This better bearing has lower friction and lower rumble.

What's in the Box
•MRC501 Miracord 50 Turntable
•Dust Cover
•Power Cord
•Manual

Specifications
•Turntable
•Drive system: Belt drive
•Motor: DC motor
•Selectable speeds: 33? and 45 rpm
•Motor servo: Speed rotation and servo system
•Rotation speed variation: +/-1%
•Wow and flutter: 0.1%
•Signal-to-noise ratio: 67 dB or higher (A-weighted) 60 dB or higher (unweighted)
•Platter: Aluminum die-cast
•Platter diameter: 12.0 in / 300 mm


•Cartridge
•Type: Audio-Technica AT91 moving magnet
•Stylus construction: Bonded diamond
•Mount: Half-inch
•Frequency response: 20 Hz to 20 kHz
•Channel separation: 18 dB
•Channel balance: 2.5 dB
•Vertical tracking angle: 20 degrees
•Stylus pressure: 2.0 g +/-0.5 g
•Cartridge weight: 5.0 g +/-0.5 g
•Headshell weight: 11.0 g (including screws nuts and wires)


•Tonearm
•Type: Aluminum t