Electro-Harmonix Pitch Fork Plus Polyphonic Pitch Shifter Pedal for Guitar

Dual engine pitch shifting with nearly endless possibilities and expansive control options. The Electro-Harmonix Pitch Fork Plus Pedal features two independent pitch shifting engines with full control over each. Both will transpose your pitch up or down over a plus or minus three octave range and detune plus or minus 99 cents. With rock solid tracking, an organic, musical tone, and extensive control, it’s your ultimate harmonizer. It has dedicated volume controls for both shift voices and the dry signal. It features two outputs, main and Aux, with multiple routing options. There are 10 unique factory presets, plus the ability to easily save and recall 100 programs. A bypass footswitch that toggles between effect on and buffered bypass. In latch mode, it switches between effect and bypass mode. In momentary mode, the effect is on when the FS is held down, and the pedal enters bypass when it’s released. A user footswitch that’s programmable and can be assigned to a variety of functions, such as muting either Shift voice or jumping to a preset program, it features a dedicated LED. An EXP input for EXP or CV control over a broad selection of parameters in three sub-menus: frequency, glissando, and volume. An EXT input for connecting an external foot controller like EHX’s Triple Foot Controller, which enables players to change modes, enter and exit sub-menus, and load presets. Eight modes including X-MOD, which features cross modulation that creates FM and ring mod type effects, and LATCH, which provides enhanced latch and momentary functionality. It comes with an included power adapter.Ext JackTRS input for connecting a generic external foot-controller such as the EHX Triple Foot Controller.Aux Output JackAuxiliary audio output.Main Output JackMain audio output.Dry KnobControls the volume level of the DRY signal.Shift 1 KnobControls the effect volume level of SHIFT 1.Shift 2 KnobControls the effect volume level of SHIFT 2.Value KnobAdjust the selected mode parameter, enter sub-menus, or save presets to memory. A press of VALUE enters sub-menus when applicable. Holding VALUE when in PRESET mode saves a preset.4-Character DisplayThe 4-character display shows the current parameter value or menu setting for the selected mode. The display shows which option is selected within a mode menu or sub-menu.AuxSelects which channel is sent to the AUX output jack. The AUX menu can also select if and how the BYPASS footswitch will affect the AUX output.