Target
TV STandsTV Screen Size | Suggested TV Stand Width |
---|---|
up to 40" | up to 40" long |
40" - 50" | up to 40" - 50" long |
50" - 60" | up to 50" - 60" long |
60" - 70" | up to 60" - 70" long |
All Sizes in Inches Unless Otherwise Stated
Sponsored
Target
TV STandsTV Screen Size | Suggested TV Stand Width |
---|---|
up to 40" | up to 40" long |
40" - 50" | up to 40" - 50" long |
50" - 60" | up to 50" - 60" long |
60" - 70" | up to 60" - 70" long |
All Sizes in Inches Unless Otherwise Stated
A: Thank you for your question. It is important when buying a TV stand to make sure that the base of the TV does not exceed the depth of the product , nor is there any over hang with the width. Also don't go over the recommended weight for the stand. Example if the depth of the product is 16.54 inches and the width is 44 inches and your base is 17 inches in depth with a 20 inches in width. IT would not be recommended to use this product because of the over hang. This product could fall very easily from the stand. When buying a stand please remember to measure the depth and width of your base of your TV, know the weight of your TV and make sure none of these exceed the recommended specifications of the stand. Hopefully this is helpful, please call 800-667-0808 if you should have other questions.
A: It depends on if the legs are in the center or on the sides. The 55 inch LG I bought did not fit because the legs were on each side of the tv and not in the center.
A: I was just asking because if I could save money by not upgrading to a 50 or 55 inch tv stand I would. plus this one is made out of better materials for the price compared to the 50-55 inch tv stands.
A: Thank you for your question after some research, I have found that the XBOX is to big for this stand. Thank you
A: Your xbox 1 should fit it has three shelves once put together
A: This TV stand is 19.69 inches tall.
A: The stand has wider legs in the front and the back have smaller legs. They are marked accordingly in the manual. The legs for the middle between two pieces of glass will have a cap on each end. The legs that go at the top will not have a cap on the part that covers the silver piece the rods screw into and the legs at the bottom will not have a cap where the footer is attached to the rod, for each of those sections there will only be one cap per leg. If you have any more questions or concerns please call customer service Monday thru Friday 9am EST thru 4pm EST as we will be glad to assist you with any questions you may have with assembling your product. Our number is 800-667-0808.
A: Assembled Dimensions (W x D x H): 44.88" x 16.54" x 19.69"
A: This TV stand is made to accommodate: total weight of 99 lbs with the 1st shelf holding up to 45 lbs max. screen size of up to 55" as long as the legs of the TV do not protrude out beyond the sides of the TV. depth of this TV stand is 11.26"
A: The assembled weight of this SDC1140 TV stand is 42.2 lbs.
A: The stand has a total depth of 16.53". The first 11.22" in depth is 44.88" wide. The glass then bevels inward 5.05" where the width changes to 36.22". We hope this clarifies these measurements for you.
A: This TV stand will not fit a 65" TV. It is compatible for TV's up to 55" only.
A: Hi Per instructions for this TV stand, the top shelf can hold up to 99lbs maximum. The two lower shelves can hold up to 44lbs each. If you are looking to put a TV that weighs 82 lbs on the top shelf of this TV stand, it is made to hold that weight. Please let us know if you have any further questions. Thank you for your inquriy AVF Group Customer Service