Graco TurboBooster 2.0 Backless Booster Car Seat - Denton

A: he is probably tall enough now that the seat belt alone fits him fine. 8 years and over, go by fit to figure out if a regular seat belt is safe.

A: Thank you for asking an excellent question! Unfortunately, the maximum height requirement for all Graco car seats is 57 inches. You son maxes out on the height requirements. We apologize for any inconvenience that this may cause!

A: Is there a minimum height?

A: Thanks for reaching out! The TurboBooster 2.0 Backless booster does not have a latch, as it is secured with the seat belt.- Graco Team

A: It says above that it’s compatible with LATCH. can you clarify?

A: Thanks for your interest in our products! The arm rest on the TurboBooster 2.0 backless booster does not fold. We hope this helps! Graco Team

A: Thanks for reaching out! The TurboBooster 2.0 Backless Booster does not have a latch. It is secured with the vehicle seat belt. -The Graco Team

A: Thank you for your interest in the TurboBooster 2.0 Backless Booster! The TurboBooster 2.0 Backless Booster has a relatively narrow design, which may help when trying to fit three car seats across a vehicle seat. We recommend measuring your vehicle seating area and comparing it with the dimensions of the booster and any adjacent car seats. If possible, a test fit in your vehicle is the best way to determine whether three seats can be installed safely side-by-side while ensuring each seat is installed and used correctly.- We hope this helps! -The Graco Team

A: Thanks for your question! This Graco booster seat helps safely transport your big kid from ages 4 -10, from 40 - 100 pounds and up to 57 inches tall. We hope this helps! Graco team

A: Thanks for asking this great question! The TurboBooster 2.0 Backless Booster seat does not have latches. It is held by the seat belt when child is sitting in it. If you're concerned about it sliding around when not occupied you can buckle using the seat belt or store in trunk. We hope this helps you determine if this car seat is a good fit for your family. Graco Team

A: Thank you for your interest in the TurboBooster 2.0 Backless Booster! The date of manufacture cannot be determined when purchasing online. The manufacture date can typically be found on the product label and may be viewable when shopping in-store. We hope this helps! - The Graco Team

A: The TurboBooster 2.0 Backless Booster does not have a built-in harness, lap belt, or any other belt of its own. It is a belt-positioning booster, which means it raises your child to help the vehicle's lap and shoulder seat belt fit properly. Regarding use in the center seating position of an SUV, the booster may be used there only if that seating position has both a lap and shoulder belt and your vehicle owner’s manual allows a child restraint to be used in that position. Booster seats should never be used with a lap-only belt. We also recommend checking both the TurboBooster 2.0 manual and your vehicle owner's manual to ensure proper fit and compatibility for the specific seating position. We hope this helps you determine if this car seat is a good fit for you family. -Graco Consume Care Team

A: Thank you for your question. Graco car seats and booster seats sold in the United States are designed, tested, and certified to meet U.S. safety standards. Because child restraint requirements vary by country and region, we are unable to confirm whether a U.S. model complies with Australian regulations, including Victoria's requirements. We recommend checking with your local child restraint authority to confirm applicable requirements before using the seat. -The Graco Team