all-brands
all-sizes| Mattress Type | Height | Twin | Twin XL | Full | Queen | King |
|---|---|---|---|---|---|---|
| Low Profile | approx. 4-9" | 38" W x 74.5" L | 38" W x 79.5" L | 53" W x 74.5" L | 60" W x 79.5" L | 76" W x 79.5" L |
| Raised | approx. 15-24" | 38" W x 74.5" L | 38" W x 79.5" L | 53" W x 74.5" L | 60" W x 79.5" L | 76" W x 79.5" L |
All Sizes in Inches Unless Otherwise Stated
A: The Intex Mid Rise 12" Air Mattress with Internal USB Pump - Twin Size, requires an external power adapter (not included), such as *USB Wall Charger rated 5V / 2A or more, *Portable USB Charger rated 5V / 2A or more, *12V Car Charger rated 5V / 2A or more, *USB Port rated 5V / 2A or more. If you need additional information, please contact our Service Center at 310-549-8235.
A: On the manual, it says the power supply must be at least 5V/2A or more. My laptop USB port was sufficient to pump the bed up. A portable power station may do the job faster. ...hope that helps.
A: It's actually slightly quieter than my airbed with an AC pump. All air pumps make noise -- it'll wake people up if you pump it up while people are sleeping in the room.
A: Hello Sandra. Thank you for your interest in Intex. We encourage you to contact our service center at 310-549-8235. You can also reach us through Live Chat, Monday – Friday 9:00am to 4:00pm PST.
A: The color matches the picture. Plush white-ish top. Vinyl grey side and bottom.
A: Hello Kelly. The Intex Mid Rise 12" Air Mattress with Internal USB Pump - Twin Size, has a white, soft velvety sleeping surface. We hope you found this information helpful.
A: To inflate this air mattress indoors, you will need a USB cable that can be connected to an external power adapter. Here are the compatible options for powering the internal USB pump: A USB wall charger rated 5V / 2A or more A portable USB charger rated 5V / 2A or more A 12V car charger rated 5V / 2A or more A USB port rated 5V / 2A or more Please note that these external power adapters are not included with the air mattress, so you will need to use your own. If you have any further questions or need additional assistance, please feel free to reach out to us via chat at intexcorp.com or call us at 310-549-8235. We’re here to help!
A: We apologize for any inconvenience, but the Intex Mid Rise 12" Air Mattress with Internal USB Pump does not automatically stop when fully inflated. Once the bed is fully inflated, please turn the dial to the center (locked) position. You can then adjust the firmness by turning the dial to the inflation or deflation mark as needed. If you have any additional questions, please feel free to contact us via chat at intexcorp.com or by calling us at 310-549-8235.
A: Deflating the Intex Mid Rise 12" Air Mattress with Internal USB Pump - Twin Size is straightforward. Here's a step-by-step guide: Open the line cord compartment cover and gently remove the line cord. Avoid yanking on the cord. Connect the line cord to the external power adapter. Turn the control dial on the internal pump to the deflation mark. Once the bed is fully deflated, turn the dial back to the center position (locked). If you don't have access to electrical power, you can also use a conventional foot pump, manual pump, or battery-operated air pump. Simply connect it to the manual inflation port inside the line cord compartment. For further assistance, feel free to chat with us at intexcorp.com or call us at 310-549-8235.
A: Yes, the Intex Mid Rise 12" Air Mattress with Internal USB Pump - Twin Size does come with an 8ft USB cable included. If you have any further questions, please feel free to contact our consumer service at 310-549-8235.
A: Hello Patty. The approximate set up size for Intex Mid Rise 12" Air Mattress is 12 Inches (H) x 39 Inches (W) x 75 Inches (D). If you need additional information, please contact our Service Center at 310-549-8235. Our business hours are Monday - Friday 8:30 am - 5:00 pm. PST.
A: Hello. The Intex Mid Rise 12" Air Mattress with Electric Pump - Twin, includes an internal pump. No need for a separate pump. We hope you found this information helpful.
A: Hello Kate. If electrical power is not available, a conventional foot, manual, or battery-operated air pump can be used by connecting it to the manual inflation port located inside the line cord compartment. We hope you found this information helpful.
