all-brands
all-sizes| Mattress Type | Height | Twin | Twin XL | Full | Queen | King |
|---|---|---|---|---|---|---|
| Low Profile | approx. 4-9" | 38" W x 74.5" L | 38" W x 79.5" L | 53" W x 74.5" L | 60" W x 79.5" L | 76" W x 79.5" L |
| Raised | approx. 15-24" | 38" W x 74.5" L | 38" W x 79.5" L | 53" W x 74.5" L | 60" W x 79.5" L | 76" W x 79.5" L |
All Sizes in Inches Unless Otherwise Stated
A: Yes. You can always use a hand pump or consider getting a pump with a plug into 12V DC automobile cigarette lighter
A: Yes, if electrical power is not available, you can use a conventional foot pump, hand pump, or battery-operated air pump. Simply connect it to the manual inflation port, ensuring the control dial is in the closed (pump off) position. Remove the cap from the manual port, insert the pump nozzle, and inflate the mattress to your desired firmness.
A: Just plug in the airbed to inflate!
A: Hey Brooks! Here's a simple breakdown of how to inflate and deflate the Intex Mid Rise Hexbeam 14" Electric Pump Twin Air Mattress To Inflate: 1. Plug in the power cord to an AC outlet. 2. Turn the control dial fully clockwise until it stops. The mattress will start inflating. 3. Once it's fully inflated to your liking, turn the control dial to the center position to shut off the pump and seal the valve. 4. If it feels too firm, turn the dial slightly counterclockwise until some air escapes. When you reach the desired firmness, return the dial to the center. Don’t unplug the pump while it’s running! Always turn the dial to the off/center position before unplugging. To Deflate: 1. Plug the power cord back into the outlet. 2. Turn the control dial fully counterclockwise to begin deflation. 3. When the air is completely out, turn the dial back to the center position to stop the pump. 4. Unplug and store the power cord neatly in the compartment. 5. Roll up the mattress starting from the end opposite the pump for compact storage.
