Kanto R400 Pro Series Recessed In Wall Full Motion TV Mount for 35"-65" TVs

R400 is a mount made for Pros featuring a true no gap installation that allows your TV to sit perfectly flush against your wall for the ultimate low-profile look. Thin TVs like OLED appear to float like a picture frame with no visible hardware. With a recessed box that sits in-between studs you can store streaming boxes and other small electronic accessories out of sight. Metal knockouts allow you to easily run a power outlet into the box while rubber grommets handle all other cabling for a completely in-wall wire-free experience. Durable metal cable management clips on the articulating arms take care of messy cables when the TV is pulled out to its full 18 of extension.

Features
•Fits Most Flat Panel TVs From 35 to 65 (up to 80 lbs.)
•Accommodates VESA Sizes From 100x100 to 400x400
•Accessible Tilt Mechanism Provides +9 to -2 Viewing Angle
•90 Of Swivel in Either Direction Depending on Screen Size
•Sits Flush Against the Wall Extends Up to 18

Perfectly FlushR400 is a true zero gap TV mount that allows TVs with a VESA pattern of 300x300 or less to sit directly against the wall for a completely flush look. The profile only increases to 0.3 if using the 400 mm VESA extensions.

Out Of SightThe recessed box is deep enough to store streaming boxes and other small AV accessories behind the TV for a clean modern setup.

Contractor FriendlyA foldable in-wall template for new construction can be temporarily placed between studs letting contractors plan cabling and drywall while the mount sits safely in its packaging until needed.

Power Where You WantMetal knock-outs allow for the installation of power outlets inside the box so you can keep everything needed to power your equipment within the wall.

Clean CablingMetal cable management clips run along the length of the articulating arm while rubber grommets within the box help you to route your cabling without any mess.

What's in the Box
•R400 Pro Series Recessed In Wall Full Motion TV Mount for 35"-65" TVs
•Mounting Hardware
•Mounting Template
•Manual

Specifications
•TV Size: Fits most TVs from 35 to 65
•Load Rated: Supports TVs up to 80 lb (36 kg)
•VESA: Accommodates VESA sizes from 100x100 to 400x400
•Tilt: Accessible tilt mechanism provides a +9 to -2 viewing angle
•Swivel: 90 of swivel in either direction depending on screen size
•Profile: Sits flush against the wall with 300x300 VESA and lower 0.3" profile for 400x400 VESA
•Extension: Extends up to 18 (45.7 cm) from the wall
•Cable Management: Integrated cable management
•Stud Spacing: Installs between 16" wood studs
•Min. TV Display Size: 35
•Max. TV Display Size: 65
•Recommended Max Weight: 80
•VESA Compatibility: 100x100 - 400x400