Monoprice Pre-Drilled 3-piece Sit-Stand Desk Table Top 63 Inches Wide - Black, Custom Sized For Motorized And Manual Crank Height Adjustable Desk

Very good price/performance item. I got the 3-piece desktop and mounted it on the manual-crank base. The desktop is OK. I had to assemble the 3 pieces, and the fit & finish is not as smooth and desirable as what a single-piece top would be. You end up with two seams that run from front to back, and they're not "seamless". You will feel the seam if you run a mouse over it, for instance. Other than that, I have not found the seams to be a problem; and a mouse pad covering the seam easily solved that minor one. The 3-piece design makes it a much more ship-able product. I did have to drill holes on the underside in order to make screw-holes to match the mounting bracket of the top of the base. Since the base does not have a default width (width is adjustable to accommodate any top), I do not see any way to avoid drilling your own holes so that they will line up with your desired base width. The base is fine. After 3 or 4 weeks now, so far so good. I got the manual crank model, so am not expecting raising/lowering issues. The handle itself is plastic and could be more substantial, but no problems yet. Overall, I'm pleased with the product. Shipping was fine; everything arrived intact and works. If you're looking for a sturdy standing desk combo for an economic price, yes I would recommend it.

Caveat emptor - Know what you're getting into

The product itself is OK, I suppose. Seems like good build quality, etc. But the problem is that Monoprice?s website led me to believe it could be used with a motorized desk base that they sell. It DOES NOT WORK. So, I am stuck with a great desk top that does not fit...

I use this with the motorized sit/stand desk frame, and overall it is awesome! The desktop itself is OK but the weakest part of the combined solution. The 3-piece aspect is of course great for shipping, but they don't fit completely 100% flush, though close enough. I was surprised how thin it was: Its specs say 1.6" thickness, but the desktop itself is only 0.6", the rest is the metal bar underneath tying the pieces together. And the laminated surface, while sturdy, is a magnet for fingerprint grease, has to be be wiped every day. On the positive side, it the predrilled holes made it very easy to fit on the desk frame. And again, the combined solution is just awesome, and highly recommended.

Purchased it for the manual sit/stand desk, but the pre-drilled holes do not align. I changed to motor sit/stand desk and it is still off. Ended up go to Home Depot and get a drill and drill my own hole for install. The desk itself is OK, the 3 pieces design is nice to ship a large desk without the large package but they don't align by default. It will work and just needed extra effort and prepare to be handy.

Per the manual this should be compatible with my Monoprice electric desk P/N 21590. It is NOT. The holes do not line up with the bracket.

Purchased this to go with a motorized Adjustable Height Desk for my wife. The curved edges were a big hit as she tends to bang into sharp corners/edges occasionally. I was initially concerned that it comes in three pieces, but the holes did in fact match-up with the frame we ordered and made a nice tight desktop. She is extremely happy with it. Would highly recommend. Only issue was the need to re-adjust the width of the adjustable height base which is an issue with the assembly instructions for the base not the desktop, and it was really just a minor annoyance. BTW, she's already recommended this desktop with matching base to a couple of her friends and co-workers.

This item fit perfectly with the motorized support I bought from Monoprice. Fantastic combo that works very well and was easy to assemble.

I bought this because it was recommended when I bought the sit and stand adjustable desk frame. The screws that supposed to fixed the top and the frame are longer the the thickness of the top. The top’s thickness is 1.6” in the specification, but actually, it is 1.6 centimeter.

Disappointed with the purchase. Description is completely wrong about working with motorized frames. I bought p/n 15722 and this top and as the picture shows predrilled holes didnt line up. Had to drill new holes. I could have bought a generic thicker table top for cheaper instead of this 3 piece silly thing. Also the Wiring hole snap covers are some of the cheapest plastic.

According to the description: This desktop has pre-drilled holes that perfectly align with Monoprice electric and manual cranks desks for easy mounting This is false. I bought this with P/N 15721 (manual sit-stand desk). A reviewer from January mentioned this. Monoprice has not corrected the item description, added holes for P/N 15721, nor altered P/N 15721 to have parts compatible with the pre-drilled holes.

Although monoprice customer support was great, I'm disappointed that this issue has been noted for that last 9 months and still not properly fixed. All hardware was included so no issues there. Holes simply did not align to workstream electric desk. I'll make due by using 1 existing hole and then drilling 3 more on each side. As it's pressed wood, this is a much less ideal option but should work.

This desk does not fit the manual crank desk, the holes do not line up!!!! In the description it states it does fit the manual crank desk well it does with modification to the desk brackets... Another dumb thing is the screws are to long and poke thru the other side, why sell something like this and the top is not that sturdy. i would maybe pay $30 for this not $84. now i have a top with holes and chips in it from the long screws provided to mount the top to the desk with.

They didnt provide any hardware, couldnt tell me the dimensions and wanted me to send the whole thing back because I was missing screws. Come on Monoprice.

My wife loves it. I had to build an adapter to make it work with the lowest cost single motor legs sold by moonrise, because the pre drilled holes didn't line up. It went together quickly and I appreciate the metal support bars underneath to help give it rigidity.

Love this desk, fit perfectly with the standing desk legs. High quality, great matte color, and very easy to assemble. I love that it breaks down into three separate pieces for easy transport when I eventually have to move.

Decent desktop, but screws provided blew through the desktop. Other than the screw blow through, it's been working well, the top is durable enough and strong enough to hold up as I caught kids climbing on it and using it as a jungle gym.

It looks and works great! Easy to install and was shipped out fast!

Customer service said this desk top would fit the #35377 desk. The page https://www.monoprice.com/product?c_id=312&cp_id=31214&cs_id=3121402&p_id=35377&seq=1&format=2 for the frame says it would fit the desktop. It does not fit the desktop at all.