Sponsored
Peakform 4' Adjustable Height Folding Table Off-White
In Stock
Sponsored
About this item
Highlights
- 3 adjustable heights (19 inch, 24 inch and 29 inch)
- Folds in half for easy storage (length is 23.62 inches folded in half)
- Stain & scratch resistant resin top
- Seats 4 to 6 people
Description
Shipping details
Return details
Q: Is there a peg you have to push in before you can extend the legs? I see the metal pegs, but I can't push them in and pull on the legs at the same time. Does it take two people to extend the legs?
A: Wear gloves so you don't hurt yourself. With table upside down, hold down frame with one foot, press very hard on two pegs. You will eventually make it work. The mechanism does not work smoothly. A cheap, poorly designed and poorly manufactured table that I do not recommend at any price.
submitted byJoe30330 - 5 years agoA: I agree with the fact that it is impossible to extend legs with one person. Even pressing 1 button while3 pulling is difficult. I rarely use this table in fact this is only the second time and my son and I were unable to extend the legs.
submitted byhbjill - 5 years agoA: I do not agree. I did manage to do it as 1 person but it was near impossible. It also seems that you have to lower the legs every time to fold. I will be returning this table tomorrow.
submitted byBarb - 5 years agoA: one person can do by pushing on the pin on one leg and extending then the other.
submitted byPDG Customer Service - 8 years agoBrand expertA: Ok folks. I am a "73" year old weakling and had it figured out before I even went to the store to buy. The leg extensions are a '1" person job. 1/ fold the legs out. 2/ push in "1" pin and pull gently until it clears the hole and goes partially into the leg. 3/ push the pin in on the other leg and pull. Bingo it comes right out into the next set of holes. If you want the legs to go into the furthest position just repeat all the steps. I had it "ALL" put together with the legs in the highest position in "2" MINUTES... Happy unfolding.........................
submitted byTarget One - 5 years agoA: After the first use the “pegs” get pushed in never to be seen again. I end up sticking screws in the holes and taping them so they stay in. Worst table ever! I just use it once a year for garage sales.
submitted byKarkkey - 7 months agoA: Aren't you just precious. The pins on mine will not go in unless they are pushed in simultaneously. I figured it out, but with the help of another person.
submitted byI must be an idiot - 2 years agoA: Yes and it’s very hard to do by yourself
submitted bySarah - 4 days ago
Q: How do you open? It does not have instructions
A: There are buttons on the side that you can push to have the legs release and fold back into the table. The following link is a You Tube video that shows how to unfold and fold your table. https://www.youtube.com/watch?v=G8cbKZYb60A
submitted byPeakform - 12 days agoBrand expertA: To unfold, unlock one lock the force it open with all of your might. There are clips inside that are extremely difficult to release.
submitted byJJJ - 6 days ago
Q: How do I fold the legs back in? The standard answer in here doesn’t help.
A: The angled bracing bar that holds the leg. Squeeze it towards the leg. So if you have the table upside down on the ground, sit behind the outside of the legs, facing the narrow way of the table. Grab one hand on each side so that you're holding the legs and that angled bracing bar and squeeze while slide your legs down.
submitted byResky - 4 months agoA: First, adjust the legs to the smallest setting. Then, where the brace meets the legs, you will press the brace towards the legs, releasing the locking pin and then bend the legs toward the table. Here is a video I found that may help; https://youtu.be/bRIHgx194Bw?si=-Z4pX8YipUwXgE_g
submitted byPeakform - 4 months agoBrand expert
Q: How do you fold the legs back down?It is alreadycollapsed to its lowest height. Several people have asked this question and the answer given by the company is not helpful. The legs are stuck open.
A: there are two sliders on each side of the legs. push in the top and then you will be able to collapse the leg.
submitted byhi - 1 year agoA: where the brace meets the legs, you will press the brace towards the legs, releasing the locking pin and then bend the legs toward the table. Here is a video I found that may help; https://youtu.be/bRIHgx194Bw?si=-Z4pX8YipUwXgE_g
submitted byPeakform - 4 months agoBrand expert
Q: What is the maximun height?
A: Full table height is 29"
submitted byPDG Customer Service - 4 years agoBrand expertA: This table has 3 adjustable heights (19 inch, 24 inch and 29 inch)
submitted byPDG Product Expert - 4 years agoBrand expert
Q: how much does it weigh?
A: 18 lbs
submitted byPDG Product Expert - 2 years agoBrand expert
Q: Will two 18" wide folding chairs fit side-by-side under the table or what's the distance between the inside of the legs?
A: The distance between the inside of the legs is 103.5cm/40.75 inches
submitted byPDG Product Expert - 5 years agoBrand expertA: The length of the table is 48", you should be good with 2 18" chairs
submitted byPDG Customer Service - 5 years agoBrand expert
Q: HOW MUCH WEIGHT WILL IT HOLD?
A: This table support 300 lbs evenly distributed weight
submitted byPDG Product Expert - 5 years agoBrand expertA: The table will hold 300 lbs evenly distributed.
submitted byPDG Customer Service - 5 years agoBrand expert
Q: The length is 48 inches. What is the width?
A: The table is 48 inches (L) 29.17 inches (H) x 23.62 inches (W)
submitted byPDG Customer Service - 6 years agoBrand expertA: The width of the table is 23.62 inches.
submitted byPDG Customer Service - 6 years ago
Q: How to open this table
A: There are buttons on the side that you can push to have the legs release and fold back into the table. The following link is a You Tube video that shows how to fold your table. https://www.youtube.com/watch?v=G8cbKZYb60A
submitted byPeakform - 5 days agoBrand expert
Frequently bought together
Guests also viewed
