ProX XZF-BWING Flip-Ready Case for Behringer Wing with Hydraulic Lift

The ProX XZF-BWING Flip-Ready case is made in Poland, exclusively for ProX by ZCase, to fit the Behringer 48CH Wing Console. These cases for digital audio consoles are designed and built to make transport and setup quick and easy. No more lifting heavy consoles into place on a table or stand. The patent-pending hydraulic lift system provides easy movement from a vertical transport position to the horizontal operational position with little effort. A heavy plywood base between the case and the four heavy-duty locking casters protects the case and equipment during transport. The lower doors opening the storage area have magnetic catches to hold them open during the movement of the console to protect the doors. The rotational mechanism attached to the console mounting bed uses gas springs, which also suppresses all vibrations generated by transport by means of Vibro-Insulators attached to the mounting bed and the sidewalls of the case body. Each case has a large doghouse area with recessed latches on the cover as well as console-specific form fitted wood side panels that retain the console firmly in the case. As the console bed rotates into the operational position, the faders will be approximately 36” from the floor. This may vary slightly with specific consoles.The ProX Flip-Ready cases are handcrafted for quality control and individually tested for smooth operation. For years Audio Engineers and Front of House technicians have faced the challenge of setting up heavy mixers, many times without adequate help. The Flip-Ready design allows for easy, one person movement from the transport position to operational position with virtually no effort.