QED Reference Subwoofer 40 Cable

QED Reference Subwoofer 40 Cable QED Reference Subwoofer 40, the new standard for timing, accuracy and rhythm QED Subwoofer 40 has been designed primarily for low capacitance, as this has been identified by QED as a major factor making  for a tight sound which retains the rhythm of the original piece - vital when it comes to the 'bottom end!" Minute timing errors are ameliorated by the use of QED's Complementary Conductor Technology™ combined with a special floating Zn/Mn ferrite jacket to absorb very high frequency noise signals outside the audible band. The QED Analoc™ plug design helps to control eddy currents which can also affect the micro-timing of the audio signal, maintaining high-fidelity from start to finish. FEATURES AND BENEFITS Floating Internal Ferrite Jacket Absorbs high frequency noise signal components outside the audio band. When measured using high frequency measurement equipment, Audio 40 products convey a comparably cleaner and tighter signal pattern when its special Zn/Mn ferrite jacket is present. This has a beneficial effect on audio signal micro-timing and may account for the clear preference expressed for the ferrite jacket in listening tests. . Analoc™ Technology QED ‘Analoc™ RCA plug which features high purity copper signal and ground connections in an insulated low eddy current brass body. The hollow central pin eliminates skin effect in the signal connection and the locking barrel design clamps the dual tombstone ground connection firmly to the RCA sockets This all new locking design features small high purity gold plated copper conductors in place of the usual large volume brass body found in ordinary "high quality" plugs. This cuts down or eliminates the tendency for the changing magnetic field in the conductor to induce eddy currents which are thought to affect the micro-timing of the audio signal. Coupled with its hollow central pin, which is designed to combat the skin effect in the same way as our X-Tube speaker cables, the new QED Analoc plug maintains the fidelity of the audio signal from start to finish. Complementary Conductor Technology (CCT) Complementary conductor geometry utilizes two conductors of different diameters to carry the same audio signal. This has the effect of providing an alternative path for high frequency audio components which might otherwise become time smeared in a single audio pathway. Improves timing and detail, retaining the rhythm of the original piece - vital when it comes to the "bottom end." Unlike conventional analogue interconnects, Reference Audio 40 uses two silver plated 99.999% Oxygen Free Copper conductors of different diameters to carry the same audio signal. This has the effect of providing an alternative signal path for more subtle audio components which might otherwise become time smeared in a single audio pathway. Reference Sub Woofer 40 is further optimized by having a 25% smaller diameter than Reference Audio 40 making it more convenient for those long runs around the room. Ferrite Insulation Technology Like putting wooden wheels on a Ferrari, conventional RCA phono plugs have the potential to undo all of the hard work carried out by our carefully designed cordage. With Anamate and Analoc RCA plugs, the fidelity of the audio signal is maintained form start to finish. Specifications QED Complementary Conductor Technology™ with 99.99% Silver Plated Oxygen Free Copper Zn/Mn ferrite jacket to absorb high frequency noise signals Low loss foamed polyethylene (PE) dielectric 99.999% Oxygen Free Copper braid for 100% electromagnetic screening coverage in a coaxial geometry Twin leaf 24c Gold plated QED Analoc™ RCA plugs featuring high purity copper contacts, hollow center pin and low eddy current design Conductor Section 0.30 mm2 Parallel Capacitance 124 pF/m Loop Resistance 0.076 Ohm/m Loop Inductance 0.33 μH Dissipation Factor @ 10 kHz 0.0210 Outside Diameter 6 mm QED Lifetime Guarantee QED PART, LENGTH, EAN QE3230, 3.0M, 5036694037560 QE3232, 6.0M, 5036694037577 QE3234, 10M, 5036694037584