Midwest Can 5gal Gas Can Red Midwest Can

A: 32 millimeters. however, we have a FMD inside that will not allow the transfer pump to reach the bottom of the can. FMDs, or Flame Mitigation Devices, are specialized safety components required in all portable fuel containers sold in the United States. Their primary function is to prevent an external flame from entering the container and igniting the fuel vapors inside, which could otherwise cause a flashback explosion. The requirement for FMDs comes from the Consumer Product Safety Commission (CPSC) Final Rule (16 CFR Part 1461), which took effect in July 2023. This rule mandates that all gas cans and similar portable fuel containers must be equipped with an FMD that passes standardized safety testing. Key technical points: • Design: FMDs are typically a mesh or flame arrestor integrated into the spout or opening of the container. • Function: They dissipate heat and quench the flame front, preventing ignition from traveling into the container. • Testing Standards: The CPSC rule references ASTM standards for flame arrestor performance, ensuring all devices meet the same minimum level of protection. In short, FMDs are federally mandated safety features designed to significantly reduce the risk of fire hazards, and every compliant gas can must include them to be legally sold in the U.S.

A: its self vent, you need to loosen the cap to vent, then tighten back.

A: It is suggested to use the Midwest Can part #8160, Yellow Can for diesel. Yellow indicates diesel.

A: Andrew, if you are experiencing any leaking, please e-mail me directly at kevinm@midwestcan.com If there are any parts that need replacing, I will be happy to help you.

A: Kas, first off thank you for your question. Containers are colored for regulatory reasons, but all of our fuel containers are treated with a protective layer. We also sell blue Kerosene containers.

A: Marochka, you need to release the pressure that builds up inside your container before each use. This is called venting. You can do this by slowly loosening the black screw cap for a few seconds. Make sure you re-tighten the cap before dispensing fuel. Some gas stations are very high flow and you need to gently begin to fill your container. You can slowly increase the speed once you find the perfect rate. There are many helpful vidoes on our website. Please visit https://midwestcan.com/faq/

A: Tater, the spout system and neck are proprietary and only fit Midwest Can Containers.

A: April, yes the containers come with a Quick-Flow Spout System (Black Cap, Spout, Dust Cap)

A: CountryGirl43, first off thank you for your question. Our larger 5 gallon containers have 2 handle design for ease of use. There is a handle located at the top of the container and also the backside.

A: Eddy, please send me a direct e-mail at kevinm@midwestcan.com I would have no issue sending you a courtesy replacement for your spouts gasket.