AT&T® DECT 6.0 Expandable Cordless Phone System for Landline, Answering System, Bluetooth® Connect to Cell™, and Call Blocker (5 Handset)

A: Hi, thanks for reaching out about AT&T® DECT 6.0 Expandable Cordless Phone System for Landline, Answering System, Bluetooth® Connect to Cell™, and Call Blocker (5 Handset) The maximum recording time is approximately 22 minutes total. One thing to note is this 22 minutes is shared between all incoming messages, your outgoing announcement, and any memos you record. Additionally, individual messages are limited to a maximum length of 3 minutes each. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Dave, thanks for reaching out about AT&T DECT 6.0 Connect-to-Cell Phone System (5 Handsets). Yes you can connect a bluetooth headset to this phone set. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Dave, thanks for reaching out about AT&T DECT 6.0 Connect-to-Cell Phone System (5 Handsets). To pair and connect a cell phone: 1. Press MENU on the telephone base in idle mode to enter the main menu. 2. Press (^) CALLER ID or (v) DIRECTORY to highlight Bluetooth, then press SELECT. 3. Press SELECT to choose Add device. 4. Press SELECT to choose Add cellular. The screen displays Please wait... followed by 1. If cell is connected to BT device, please disconnect it. -If there are already 4 paired devices on the list, the 4th one on the list will be automatically removed, regardless of whether the pairing of the new device is successful or not. -If there are already 2 active devices on the list with prefix D1: or D2:, the telephone base shows Cell Phone X is deactivated for adding a new device (Cell Phone X represents the device name of the active cell phone). 5. Press NEXT. The screen displays 2. Place cell phone next to base. -All devices that are connected to the telephone base are disconnected until the pairing process completes. 6. Press NEXT to turn on the telephone base discoverable mode. The screen displays Set cell to search base: AT&T DECT 6.0 PIN: 0000. Promptly turn on the Bluetooth feature of your cell phone and search for or add new devices. 7. Once your cell phone finds your AT&T phone (AT&T DECT 6.0), press the appropriate key on your cell phone to continue the pairing process. -Your cell phone may require a passcode. In this case, the telephone base displays Check cellular. ENTER PASS CODE. Enter the cell phone passcode (typically 0000) into the telephone base and press SET. -Enter the PIN of the telephone base (the default PIN is 0000) into your cell phone to continue the pairing process, if required. The telephone base displays Adding Cell Phone Y (Cell Phone Y represents the device name of your cell phone). 8. When a device is successfully connected, the telephone base displays Cell Phone Y is added and connected to base and the corresponding status icon ( 1 or 2) displays (Cell Phone Y represents the device name of your cell phone). The corresponding device light on the telephone base (CELL 1 or CELL 2/HEADSET ) turns on. More info can be found in the manual linked below. https://cdn-media-att.vtp-media.com/products/CLP/CLP99XX7/CLP99XX7_WEBCIB_i5.0_20210504.pdf If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.

A: Hi Mary, thanks for reaching out about the AT&T DECT 6.0 Connect-to-Cell Phone System (5 Handsets). Yes, the AT&T DECT 6.0 Phone System can be solely used for a landline. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7 am-11 pm CST.

A: Hi Denise, thanks for reaching out about AT&T DECT 6.0 Connect-to-Cell Phone System (5 Handsets) (87892774) The model number for this phone system is ATCLP99587. If you have any additional questions, we welcome you to contact MyTGTtech at 833-848-8324 every day, between 7am-11pm CST.