Audio-Technica 3000 Series (4th Gen) Network Enabled UHF Wireless with BP892xcH-TH MicroSet Omnidirectional Condenser Headworn Microphone

The 3000 Series (fourth generation) wireless systems provide easy setup, versatile operation and rock-solid, richly detailed sound reproduction. Available network-enabled systems offer network monitoring and control via Audio-Technica’s Wireless Manager software.All 3000 Series Network enabled systems feature:Network port for monitoring and control via A-T Wireless Manager softwareAn AT8631 joining plate included in each network enabled system.Network enabled receivers will no longer have a 1/4" audio output but will retain the balanced XLR output.Network enabled systems feature monitor and control functions via A-T’s Wireless Manager software, not network audio.3000 Series Network The Audio-Technica fourth-generation 3000 Series wireless systems give the power and flexibility to operate within the congested UHF spectrum. 3000 Series systems have an operating range of 300' (100 m) and are available in two frequency bands – DE2 (470–530 MHz) and EE1 (530–590 MHz) – that provide a class-leading 60 MHz tuning range. It’s more than twice that offered by the previous 3000 Series models. Frequencies can be easily scanned and selected on the receiver, then synced with the transmitter via IR sync functionality. The 3000 Series even lets set a backup frequency that can be quickly swapped by pressing the transmitter's multifunction button in the event of unexpected interference.This system configuration features an ATW-R3210N receiver along with an ATW-T3201 body-pack transmitter. The ATW-T3201 is equipped with Audio-Technica's new rugged cH-style screw-down 4-pin connector. It provides secure connection to A-T's cH-style lavalier and headworn microphones, or cables. Transmitters feature rugged, metal housings and are powered by two AA batteries. Charging terminals on each transmitter work with the ATW-CHG3 and ATW-CHG3N charging docks (sold separately) to recharge NiMH batteries.3000 Series network-enabled systems offer the same features and configurations as the standard systems along with network monitoring and control via Audio-Technica’s Wireless Manager software. Each network-enabled receiver also comes with an AT8631 joining plate.Consumer AlertMost users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL- FCC) or visit the FCC's wireless microphone website.