AudioQuest Sydney RCA to RCA Cable - 0.6 Meters

SydneyAll cables in AudioQuest's Bridges Falls Series place their left and right channels in a single jacket and feature Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin flexible and uniquely versatile high-performance cable that can be terminated with a variety of todays connections including 3.5mm (male or female) DIN and RCA. In Bridges Falls youll find better metals and more sophisticated technologies including Air-Tube insulation Dielectric-Bias System and Noise-Dissipation System at lower prices than ever before. Do keep in mind however that by necessity the plugs on Bridges Falls cables are fairly close together. If the L and R inputs of your components are more than 3 (7.6cm) apart please consider models from the Rivers or Elements Series.

Solid Perfect-Surface Copper+ (PSC+) ConductorsPerfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wires surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft pure and smooth as possible it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet most audiophiles were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Sydneys conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion often causing a somewhat dirty harsh sound. Solid conductors are fundamental toward achieving Sydneys very clean sound.

Polyethylene Air-Tube InsulationAny solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. All of Sydneys conductors use PE Air-Tube Insulation because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials.

Carbon-Based 3-Layer Noise-Dissipation System (NDS)100% shield coverage is easy. Preventing captured RF Interference from modulating the equipments ground reference requires AQs Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipments ground plane.

Asymmetrical Double Balanced GeometryPurpose designed for single-ended applications Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield Double-Balanced designs separate the two for cleaner quieter performance.

Cold-Welded Direct-Silver Plated Pure Purple Copper TerminationsThis plug design allows for a connection devoid of solder which is a common source of distortion. Because the ground shells are stamped instead of machined the metal can be chosen for low distortion instead of machinability. Purple Copper offers a cleaner clearer sound over nickel-plated or OFHC metals commonly found in competing manufacturers plugs. Direct-Silver Plating offers one more important step toward greater