Graco SlimFit 3-in-1 Convertible Car Seat

A: Thanks for your interest in our products! The Slim Fit 3 in 1 can be installed using the inright latch system, or the seat belt of vehicle. We hope this helps! Graco team

A: Thank you for your interest in our products! Our SlimFit 3 in 1 car seat is 25.5'' H x 21.5'' D x 19.9'' W. If you need help installing your car seat, please reach out to a local certified Certified Child Passenger Safety Technician (CPST) for assistance. This is a free service, one can be found in your area at: https://www.nhtsa.gov/equipment/car-seats-and-booster-seats#inspection-inspection We also have CPSTs available to help if needed, please contact us at 800-345-4109 Monday-Friday 8:00-5:00 EST and choose option 2.

A: Are you sure they’re definitely fixed? We have the same issue in our Sienna and there is a tiny keyhole slot on the side of the base (the base where the pins slide in). If you stick something in there they come out completely. I used a kabob skewer but a small flathead screwdriver might work.

A: I use 2 of these in the back of my Dodge Challenger that has headrests that don't come out and i just go over them and it works fine.

A: I found it easier to purchase a second car seat for my 2 cars. The struggle of constantly moving the seat is not worth it.

A: Thanks for reaching out, we appreciate your interest in our products! Due to the grow-with-baby features, the SlimFit 3-in-1 Car Seat doesn't have a removable carrier or separate base. This seat can be installed using your vehicle seat belt or the included InRight™ LATCH system. We hope this helps!

A: It would probably be easiest to have two of them, but that's not financially feasible for everyone. I will eventually be buying 2 so we don't have to worry about switching between cars. It's really just personal preference.

A: Thanks for your interest in our products! The SlimFit 3-in-1 Convertible car seat is designed with a slimmer profile to help save space, but fitting 3 across in the backseat of a crew cab pickup like a Silverado 2500 depends on a few factors. The dimensiond of the SlimFit is approximately 19.75" wide per seat. For 3 across you'd need at least 59.25" inches of usable width, allowing for proper installation and clearance. - Graco Team

A: There also is the slimfit 3 in 1 LX which is even slimmer

A: How can we request a car seat purchased after 6/30/25 as opposed to one manufactured before this date?

A: Thank you for your inquiry! Parents and caretakers may check the manufacturing date of the car seat to determine if a Graco car seat meets the new side impact rules. All car seats (excluding belt-positioning boosters) manufactured after June 30, 2025, pass testing to these new standards. All Graco car seats manufactured before this date have undergone rigorous side impact testing to our internal standard and are safe and meet all the regulations and standards active on the manufacturing date. We hope this helps! - The Graco Team

A: Thanks for your interest in our products! The SlimFit 3-in-1 Convertible car seat wil fit on bucket seats. -Graco Team

A: Thanks for reaching out! To loosen the harness, press down on the harness release lever on the front of the seat, under the seat pad while pulling out o the harness straps. We hope this helps! -Graco Team

A: Thanks for your interest in our products! The SlimFit 3-in-1 car seat is not compatible with the Click Connect strollers. -Graco Team

A: Thanks for your interest in our products! The SlimFit 3-in-1 car seat does not have the Snuglock feature. Graco Team

A: Thanks for your interest in our products! The SlimFit 3-in-1 car seat grows with your child from rear-facing harness (5-40 lb) to forward-facing harness (26.5-65 lb) to highback booster (40-100 lb). We hope this helps! Graco Team