Graco Turn2Me 3-in-1 Rotating Convertible Car Seat

A: no it stays in the car

A: When are we suppose to remove the new born cushions? Thanks!!

A: It is not detachable like most car seats. We had to bring the whole thing in when getting sent home from the hospital, it is not easy to move around with but is helpful for spinning in the car to get baby in the car seat.

A: Thank you for your interest in our products! The Turn2Me 3-in-1 Rotating Car Seat is designed to remain installed in your vehicle. Unlike infant car seats, it does not detach from the base. We hope this helps! - The Graco Team

A: Thanks for your interest in our products! All Graco car seats (excluding backless boosters) manufactured before June 30, 2025 have undergone rigorous side impact testing to our internal standards and are safe ans meet all the regualtions and standards active on maufacturing date. - Graco Team

A: Yes! I have this in my 2021 4 door with no issues. I leave it turned when she's not in it for more front seat side

A: Thank you for your interest in our products! All our car seats fit in most US vehicles. The Turn2Me is ‎20.75 x 19.13 x 24.4 inches. Please reference the car seat manual and your vehicle owner's manual for information about how to safely install car seats in your specific vehicle. – The Graco Team

A: Usually it’s by 11 pounds in most Graco seats

A: Thanks for reaching out! The infant inserts for the Turn2Me 3-in -1 Rotating car seat must be used together. Use only in rear facing position. . Body support must be used if shoulders are below the lowest harness setting. If shoulders are abouve the lowest hasrness setting they can be removed. We hope this helps! Graco Team

A: there is not a stroller compatible with this. it stays in the car.

A: Thank you for your interest in our products! The Turn2Me 3-in-1 Rotating Convertible Car Seat is not compatible with strollers. We hope this helps! - The Graco Team

A: You can turn the car seat whenever you need to get your toddler in/out of it, it is very easy compared to other car seats. The only time it must remain locked in rear or forward facing is when the car is moving with the child in the seat. You can leave the seat turned any way if child is not in it to allow extra room.

A: Thanks for reaching out! The Turn2Me turning function is only able to be used when the car seat is rear facing, to make it easier to get baby in and out of the vehicle. Thanks! - The Graco Team

A: Thank you for your interest in our products! The Turn2Me Car Seat is designed to grow with your child through multiple stages: rear-facing mode 4-40 lb, forward-facing harness 26.5-65 lb and as a highback booster 40-100 lb. Once your child exceeds the limits of the highback booster, a backless booster will be needed to continue supporting safe travel. We hope this helps! - The Graco Team

A: Thanks for your interest in our products! The Turn2Me 3-in-1 Rotating car seat can be installed on either side. Graco Team

A: Thanks for your interest in our products! The dimensions for the Turn2Me are (W) 19.13" x (H) 24.4" x (D) 20.75". We suggest checking with a retailer to see if you can try the seat in car to see if it will fit. Graco Team

A: Thanks for your interest in our products! The maximum weight limit for the Turn2Me 3-in -1 Rotating car seat is 100 lbs. We hope this helps! -Graco Team